Hi all.
Replacing the cambelt and tensioner in an early 1985 1.6TD and noticed that the old tensioner is rubbing against the engine - a mechanic I spoke to seems to think it should have had a washer or shim (assuming with the off centre bolt hole) in place but there was nothing there. Can't seem to find mention of one on any of the usual parts sites - any ideas?
Rebuild on hold...
Missing part in cambelt replacement?
Moderators: User administrators, Moderators
Missing part in cambelt replacement?
1985 1.6TD Gipsy
1966 MGB
2005 1.9TD Convertible Beetle
1966 MGB
2005 1.9TD Convertible Beetle
-
- Registered user
- Posts: 798
- Joined: 15 Oct 2006, 11:19
- 80-90 Mem No: 5533
- Location: rambler de oria, near albox,almeria,spain
Re: Missing part in cambelt replacement?
Vagcat dosent show one,is the tensioner fitted the right way round?
I dont think, so I'm not[do I exist?]
1992 1600td [ jx ] syncro panel van[leisuredrive camper ]
1992 1600td [ jx ] syncro panel van[leisuredrive camper ]
-
- Registered user
- Posts: 182
- Joined: 30 Jun 2013, 19:21
- 80-90 Mem No: 14574
- Location: Near Shrewsbury
Re: Missing part in cambelt replacement?
If it is the correct way around then it could just be the tensioner isn't the correct one. I had to send a couple back before I got the right one.
Mark.
2wd Syncro. JX powered. White with black ragtop sunroof
2wd Syncro. JX powered. White with black ragtop sunroof