Club 80-90 Forums

Are there any recommended refurbishers of VW injectors? (2.1 DJ)
I know of one but just wondered if any others have been pleased with a service done

Pete Barr was very pleased with whoever did the injectors on his old DJ

Sent from my Nokia N-gage

hgl in hull do a tidy job

mark

mark wrote:hgl in hull do a tidy job

mark

got a link?

What do you get for your money, mine look like they've been hung off a pier, is the body tidied up or just the guts sorted?

the chap who does it is a former partner in the garage, I dropped the van off they removed them and refitted them after refurb, you get a read out of before and after performance....quite a few offof here have used them

http://www.injectorcleaning.co.uk/" onclick="window.open(this.href);return false;

mark

Just sent four to the guy in hull.Got a few spares should yours be really shoddy kev.

R0B wrote:Just sent four to the guy in hull.Got a few spares should yours be really shoddy kev.

The injectors work ok Rob thanks for the offer, it's just cosmetically they are very rusty.

I have had some interesting problems with my 2.1 DJ WBX over the years but touch wood have never had any trouble that has been symptomatic of injector problems. I am well over my inquisitive phase in my old age and now apart from oil & water etc, tend to operate on a don't fix what isn't busted regime.
Have I been lucky with injectors, do they need cleaning by additives or by removal and how difficult is it to have them fixed or repaired if they go wrong. Are they available to buy?
Cheers
CS

United Diesels in Bomere Heath, Shrewsbury do refurbished and Project Power ones for T4s, so they can probably do them.

Got mine back yesterday.All parts were replaced.pins,nozzles,rubber pipes.Big difference on the diagnostic sheet before and after.
Put them back on the van,then realised i had not put the rubber seals back on the nozzles.

Cheers rob that's good to know.

Wait out on that one Kev. Got a really good set i can send you if you ping your address over.

Got the keys aswell ta

Resurrection time!

Graham at HGL Sales just processed a few sets for me, I included some spares and a good job too, some were rusted solid despite having a good clean and good coil resistances.

Super fast service and he left the hose tails off and included loose ferrules, so I could fit my own choice of hose i.e. Cohline 2240 FPM/ECO 7.3 x 13.5

Highly recommended.

www.injectorcleaning.co.uk