How'dy it's a tall one but would anyone know the thread gauge figure of an inlet manifold stud on a 2.0 CU Aircooled? I have stripped one and looking to helicoil it but need to know size and thread count before I purchase one
Thanks
Inlet manifold stud thread patten and count?
Moderators: User administrators, Moderators
- Northfalia
- Registered user
- Posts: 50
- Joined: 01 Apr 2014, 13:52
- 80-90 Mem No: 15240
- Location: Manchester
Inlet manifold stud thread patten and count?
79 westy joker pop top and 82 Westy high top
- bigherb
- Registered user
- Posts: 2579
- Joined: 27 Mar 2008, 13:50
- 80-90 Mem No: 5789
- Location: West Kent
Re: Inlet manifold stud thread patten and count?
M8 standard thread
1982 Camper 1970 1500 Beetle Various Skoda's, Ariel Arrow
-
- Registered user
- Posts: 313
- Joined: 24 Mar 2015, 11:44
- 80-90 Mem No: 14339
- Location: Aberfoyle
- Northfalia
- Registered user
- Posts: 50
- Joined: 01 Apr 2014, 13:52
- 80-90 Mem No: 15240
- Location: Manchester
Re: Inlet manifold stud thread patten and count?
Hi thanks for the replies, I've never tapped a stud before ( no pun intended ) what exactly do I need I was only going the helicoil route as a friend said I needed to find out the thread count etc. so what exactly do I need to get this job done ? Thanks again
79 westy joker pop top and 82 Westy high top
- bigherb
- Registered user
- Posts: 2579
- Joined: 27 Mar 2008, 13:50
- 80-90 Mem No: 5789
- Location: West Kent
Re: Inlet manifold stud thread patten and count?
You need to buy a helicoil kit like this.Northfalia wrote:Hi thanks for the replies, I've never tapped a stud before ( no pun intended ) what exactly do I need I was only going the helicoil route as a friend said I needed to find out the thread count etc. so what exactly do I need to get this job done ? Thanks again
http://www.ebay.co.uk/itm/Brand-New-XTo ... SwPe1T9Mim" onclick="window.open(this.href);return false;
Use the supplied drill to open up the hole making sure you drill the hole straight.
Use the tap to cut the new thread. Preferably use some cutting oil as lubrication.
Screw in the new helicoil insert using the supplied tool.
If necessary break off the tang from the helicoil.
Finnished
1982 Camper 1970 1500 Beetle Various Skoda's, Ariel Arrow
- Northfalia
- Registered user
- Posts: 50
- Joined: 01 Apr 2014, 13:52
- 80-90 Mem No: 15240
- Location: Manchester
Re: Inlet manifold stud thread patten and count?
Wow that's amazing just what I need cant thank you enough. Love the pics give great detail as to what needs doing
......that brings me to my next question! is it possible to do it with head in situ? I'm not that confident to start "popping off the head" at the moment
Thanks herb/ folks
......that brings me to my next question! is it possible to do it with head in situ? I'm not that confident to start "popping off the head" at the moment
Thanks herb/ folks
79 westy joker pop top and 82 Westy high top
- bigherb
- Registered user
- Posts: 2579
- Joined: 27 Mar 2008, 13:50
- 80-90 Mem No: 5789
- Location: West Kent
Re: Inlet manifold stud thread patten and count?
Northfalia wrote: ......that brings me to my next question! is it possible to do it with head in situ?
Yes you can no need to remove the head. But because of clearance issues with the bodywork it is better with the engine removed or swung down clear of the body.
1982 Camper 1970 1500 Beetle Various Skoda's, Ariel Arrow
- Northfalia
- Registered user
- Posts: 50
- Joined: 01 Apr 2014, 13:52
- 80-90 Mem No: 15240
- Location: Manchester
Re: Inlet manifold stud thread patten and count?
No worries I'm going to attempt it in situ I can see I will be restricted with the engine panel think I have a 90 degree chuck somewhere, the helicoil was ordered last night just after your reccomendation so just waiting for the bugger to turn up. i think fresh studs and copper nuts wouldn't go a miss. Thanks again
Regards
Regards
79 westy joker pop top and 82 Westy high top