jx 1.6td engine water from exhaust

Big lumps of metals and spanners. Including servicing and fluids.

Moderators: User administrators, Moderators

User avatar
Oldiebut goodie
Registered user
Posts: 7265
Joined: 18 Apr 2008, 01:19
80-90 Mem No: 11135
Location: Eastern Angle

Re: jx 1.6td engine water from exhaust

Post by Oldiebut goodie »

1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶

clone123
Registered user
Posts: 492
Joined: 30 Oct 2015, 22:05
80-90 Mem No: 0
Location: Manchester

Re: jx 1.6td engine water from exhaust

Post by clone123 »

Cheers oldiebut goodie for the info. Whiles looking for the right engine im still going to try and repair my 1.6td engine which every get done frist goes in my van no rush have you seen my van. :shock: cheers again boys and girls
1985 RHD T25 hightop camper 1.9td 1Y engine
It's always easier with a friend

dave friday
Registered user
Posts: 798
Joined: 15 Oct 2006, 11:19
80-90 Mem No: 5533
Location: rambler de oria, near albox,almeria,spain

Re: jx 1.6td engine water from exhaust

Post by dave friday »

I think you fitted the head gasket on upside down! if you look at the head [in your pic]the oil comes up from the block next to the second bolt hole from the right.
Have a look at the gasket!
I dont think, so I'm not[do I exist?]
1992 1600td [ jx ] syncro panel van[leisuredrive camper ]

User avatar
Oldiebut goodie
Registered user
Posts: 7265
Joined: 18 Apr 2008, 01:19
80-90 Mem No: 11135
Location: Eastern Angle

Re: jx 1.6td engine water from exhaust

Post by Oldiebut goodie »

I looked at that also and I wasn't sure at first but then the marks are correct when zoomed in.

Image
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶

dave friday
Registered user
Posts: 798
Joined: 15 Oct 2006, 11:19
80-90 Mem No: 5533
Location: rambler de oria, near albox,almeria,spain

Re: jx 1.6td engine water from exhaust

Post by dave friday »

Yes your right Oldie,the op asked how does the oil get to the head...and I was kinda wondering..
I dont think, so I'm not[do I exist?]
1992 1600td [ jx ] syncro panel van[leisuredrive camper ]

clone123
Registered user
Posts: 492
Joined: 30 Oct 2015, 22:05
80-90 Mem No: 0
Location: Manchester

Re: jx 1.6td engine water from exhaust

Post by clone123 »

I will check it again but when we took it apart me and my brother was looking to make sure I had put it on the right way because I tried it on the other way and it was blocking that hole abit so we decided we had it right but I hope your right and that's all it is I can live with that looking stupid :oops:
1985 RHD T25 hightop camper 1.9td 1Y engine
It's always easier with a friend

clone123
Registered user
Posts: 492
Joined: 30 Oct 2015, 22:05
80-90 Mem No: 0
Location: Manchester

Re: jx 1.6td engine water from exhaust

Post by clone123 »

Hi thinking of buying this http://www.ebay.co.uk/ulk/itm/121927470679" onclick="window.open(this.href);return false; because of the water issue it says new can anybody think of any problems I may have
1985 RHD T25 hightop camper 1.9td 1Y engine
It's always easier with a friend

camper
Registered user
Posts: 357
Joined: 30 Oct 2005, 20:26
80-90 Mem No: 1710
Location: Bookham Surrey

Re: jx 1.6td engine water from exhaust

Post by camper »

Other advice may be given. Your engine is a 1,6td isn't it? The cylinder head advertised off ebay is for a normal aspirated engine but covers different engine codes.It said JR well then this means hydraulic buckets and not shimmed adjusted as is on your engine.This will not fit to your cast iron cylinder block and match to the oil galleries on your engine.This cylinder head advertised has a extra oil gallery which yours has not.Some one will come along to give there advice to confirm or not what I said. But I ran a hydraulic adjusted cam bucket engine and the engine code was JR so I am going by my own experience and no there are diffrences between shim adjusted buckets heads JX engine code and JR engine code with hydraulic adjusting buckets .

camper
Registered user
Posts: 357
Joined: 30 Oct 2005, 20:26
80-90 Mem No: 1710
Location: Bookham Surrey

Re: jx 1.6td engine water from exhaust

Post by camper »

camper wrote:Other advice may be given. Your engine is a 1,6td isn't it? The cylinder head advertised off ebay is for a normal aspirated engine but covers different engine codes.It said JR well then this means hydraulic buckets and not shimmed adjusted as is on your engine.This will not fit to your cast iron cylinder block and match to the oil galleries on your engine.This cylinder head advertised has a extra oil gallery which yours has not.Some one will come along to give there advice to confirm or not what I said. But I ran a hydraulic adjusted cam bucket engine and the engine code was JR so I am going by my own experience and no there are diffrences between shim adjusted buckets heads JX engine code and JR engine code with hydraulic adjusting buckets .
Well I looked again at the engine codes it will cover and it says JX & JR which is a surprise to me as I remember I ordered a head gasket was specific to only fit a JX or a other type to fit only a JR . Sorry if it sounds confusing hopefull some one might come along to give there advice :twisted:

clone123
Registered user
Posts: 492
Joined: 30 Oct 2015, 22:05
80-90 Mem No: 0
Location: Manchester

Re: jx 1.6td engine water from exhaust

Post by clone123 »

Cheers again yes it is a jk 1.6td And I knew there was something not right for that price. :(
1985 RHD T25 hightop camper 1.9td 1Y engine
It's always easier with a friend

clone123
Registered user
Posts: 492
Joined: 30 Oct 2015, 22:05
80-90 Mem No: 0
Location: Manchester

Re: jx 1.6td engine water from exhaust

Post by clone123 »

Ok cheers I just message them to see what they say
1985 RHD T25 hightop camper 1.9td 1Y engine
It's always easier with a friend

camper
Registered user
Posts: 357
Joined: 30 Oct 2005, 20:26
80-90 Mem No: 1710
Location: Bookham Surrey

Re: jx 1.6td engine water from exhaust

Post by camper »

Can you confirm the engine code on your engine please.Actualy the price is good for the cylinder head advertised.Its a matter of getting some facts correct.

clone123
Registered user
Posts: 492
Joined: 30 Oct 2015, 22:05
80-90 Mem No: 0
Location: Manchester

Re: jx 1.6td engine water from exhaust

Post by clone123 »

Can anybody give me a rough idea of what price I can expect to pay for a complete jx1.6td engine with all accessories but been stood in a shed for 2 year was running before removed ?????
1985 RHD T25 hightop camper 1.9td 1Y engine
It's always easier with a friend

Plasticman
Trader
Posts: 8047
Joined: 12 Oct 2005, 20:55
80-90 Mem No: 1948
Location: lincolnshire

Re: jx 1.6td engine water from exhaust

Post by Plasticman »

about what you would pay for a blown non runner, i mean how do you know its not, unless seller says fit it and if your happy pay for it as opposed to paying for it and seeking redress after if not good. therein lies the dilemma
mm

clone123
Registered user
Posts: 492
Joined: 30 Oct 2015, 22:05
80-90 Mem No: 0
Location: Manchester

Re: jx 1.6td engine water from exhaust

Post by clone123 »

Cheers for all the advice I have got from this site now I have to So many decisions to make will give feedback when I decide. :ok
1985 RHD T25 hightop camper 1.9td 1Y engine
It's always easier with a friend

Post Reply