That's a dinner plate! There's a space for my peas chips and ketchup!
Nope that's the one! Gonna fit it!
Front brake disc splash plate
Moderators: User administrators, Moderators
- xpress
- Registered user
- Posts: 380
- Joined: 27 Apr 2009, 11:33
- 80-90 Mem No: 6827
- Location: West London, UK
Re: Front brake disc splash plate
Das AutoWagen.
-
- Registered user
- Posts: 42
- Joined: 07 Aug 2014, 14:29
- 80-90 Mem No: 13722
- Location: Ross on Wye
Re: Front brake disc splash plate
I have a splash plate missing. I am getting a replacement and need to know the size and length of the three Philips? head screws that hold It on
Thanks
Thanks
- bigherb
- Registered user
- Posts: 2579
- Joined: 27 Mar 2008, 13:50
- 80-90 Mem No: 5789
- Location: West Kent
Re: Front brake disc splash plate
M6x12mmgarrytheskate wrote:I have a splash plate missing. I am getting a replacement and need to know the size and length of the three Philips? head screws that hold It on
Thanks
1982 Camper 1970 1500 Beetle Various Skoda's, Ariel Arrow
-
- Registered user
- Posts: 42
- Joined: 07 Aug 2014, 14:29
- 80-90 Mem No: 13722
- Location: Ross on Wye
Re: Front brake disc splash plate
Many thanks
-
- Registered user
- Posts: 2673
- Joined: 03 Apr 2007, 12:54
- 80-90 Mem No: 8386
- Location: Nottingham
Re: Front brake disc splash plate
You may need to replace the hub nuts (the ones that peen over to stop themselves coming undone) these can be re-used but after a few times they become damaged. Also take this opportunity to clean and re-pack the wheel bearings with general purpose high melting point grease (don't over pack)
Be careful NOT to load the bearings when re-fitting the hub nut, these vehicles use taper roller bearings so you effectively refit taking the nut down until it touches..the wheel should have slight bearing play when refitted to allow for expansion.
Martin
Be careful NOT to load the bearings when re-fitting the hub nut, these vehicles use taper roller bearings so you effectively refit taking the nut down until it touches..the wheel should have slight bearing play when refitted to allow for expansion.
Martin
1989 California 2.1MV
-
- Registered user
- Posts: 42
- Joined: 07 Aug 2014, 14:29
- 80-90 Mem No: 13722
- Location: Ross on Wye
Re: Front brake disc splash plate
The three fixings that hold the splash plate, is there enough room to fit three hex head screws?