2.1DJ Oil Cooler
Moderators: User administrators, Moderators
2.1DJ Oil Cooler
Ive decided not to put this on the temporary DG1900 lm using for now. I will use the Digijet system though. Any issues?
Also, pulled the top from thermostat housing and the thermostat looks brand new. Yet never noticed a direction arrow before!
Lastly, leave top housing off thermostat until engine is in place or add now? Use some gasket sealant on o'ring?
Regards
Stuart
Also, pulled the top from thermostat housing and the thermostat looks brand new. Yet never noticed a direction arrow before!
Lastly, leave top housing off thermostat until engine is in place or add now? Use some gasket sealant on o'ring?
Regards
Stuart
MaxStu
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
-
- Registered user
- Posts: 1911
- Joined: 10 Aug 2019, 23:30
- 80-90 Mem No: 17004
- Location: Coventry
Re: 2.1DJ Oil Cooler
I didn't use any sealant on my thermostat o ring, just plonked it in and that was that. Dunno if you should put it on before you might catch it and damage it if its on, and being plastic it wouldn't take kindly to that kinda thing.
1985 LeisureDrive 2.1DJ 5 Speed syncro conversion project.
1979 LT 2.0CH Westy project
1979 LT 2.0CH Westy project
- Mocki
- Membership Admin
- Posts: 16981
- Joined: 29 Sep 2005, 09:27
- 80-90 Mem No: 428
- Location: Mansfield Notts
- Contact:
Re: 2.1DJ Oil Cooler
Put it together before putting it in , i have never damaged one, much more likely to damage the oil fill tube in my experience , and i have never removed one of those for a engine swap either .
no goo on the “O” ring , just make sure its all spotlessly clean and free of dirt before assembly and copper slip the bolts that hold the top on AND the thermostat to the head
no goo on the “O” ring , just make sure its all spotlessly clean and free of dirt before assembly and copper slip the bolts that hold the top on AND the thermostat to the head
Steve
tel / txt O7947-137911
________________
1989 2.1LpgWBX HiTop Leisuredrive Camper
1988 2.1 Caravelle TS TinTop Camper
tel / txt O7947-137911
________________
1989 2.1LpgWBX HiTop Leisuredrive Camper
1988 2.1 Caravelle TS TinTop Camper
Re: 2.1DJ Oil Cooler
Ta very much to both
MaxStu
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
Re: 2.1DJ Oil Cooler
Mocki wrote: ↑13 Jan 2022, 15:47 Put it together before putting it in , i have never damaged one, much more likely to damage the oil fill tube in my experience , and i have never removed one of those for a engine swap either .
no goo on the “O” ring , just make sure its all spotlessly clean and free of dirt before assembly and copper slip the bolts that hold the top on AND the thermostat to the head
Forgot to ask, Steve...what method do you use to stop torque converter from coming out?
Also less need to drop the gearbox and engine si far cos autos dont need to clear spigot shaft?
MaxStu
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
- DoubleOSeven
- Registered user
- Posts: 2490
- Joined: 25 Jul 2014, 21:10
- 80-90 Mem No: 14520
- Location: Reading, England
- Contact:
Re: 2.1DJ Oil Cooler
Ive decided not to put this on the temporary DG1900 lm using for now
DG's don't have oil coolers do they, so no - leave it off.
DG's don't have oil coolers do they, so no - leave it off.
1990 Volkswagen Transporter 2.1 Manual
2005 Porsche 911 3.6 Manual
2012 Volkswagen Polo 1.4 Automatic
2005 Porsche 911 3.6 Manual
2012 Volkswagen Polo 1.4 Automatic
-
- Registered user
- Posts: 1911
- Joined: 10 Aug 2019, 23:30
- 80-90 Mem No: 17004
- Location: Coventry
Re: 2.1DJ Oil Cooler
From what I gather stu isn't putting it on the engine, I think he wanted clarification on what to do with it while the 2.1 its attached to is out of the van.
1985 LeisureDrive 2.1DJ 5 Speed syncro conversion project.
1979 LT 2.0CH Westy project
1979 LT 2.0CH Westy project
Re: 2.1DJ Oil Cooler
Thanks Martin & Steve.
I was just confirming what l already kind of knew. DG's dont run an oil cooler. I was wondering if there is any benefit from fitting up the cooler to the DG, though?
My camper is auto, and pulls a small caravan. Yet have done so before when this temp. engine was in a previous camper manual five speeder without issue.
Decided not to fit cooler to temporary engine (perhaps not so temp looking at the sorry external state of the fubarred 2.1). Have blocked the cooler to thermostat housing for now. This way l can turn key ready the rebuilt 2.1 on the workbench.
Regards
Stuart
I was just confirming what l already kind of knew. DG's dont run an oil cooler. I was wondering if there is any benefit from fitting up the cooler to the DG, though?
My camper is auto, and pulls a small caravan. Yet have done so before when this temp. engine was in a previous camper manual five speeder without issue.
Decided not to fit cooler to temporary engine (perhaps not so temp looking at the sorry external state of the fubarred 2.1). Have blocked the cooler to thermostat housing for now. This way l can turn key ready the rebuilt 2.1 on the workbench.
Regards
Stuart
MaxStu
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
-
- Registered user
- Posts: 1911
- Joined: 10 Aug 2019, 23:30
- 80-90 Mem No: 17004
- Location: Coventry
Re: 2.1DJ Oil Cooler
I mean if you're using the 2.1 thermostat housing you can always put a cooler on if you need, I dunno if you'd need to drop the oil but you'd need to get the longer threaded bit off the oil filter/cooler on the 2.1 and fit it to the 1.9. If you needed it that is.
Might be added insurance but I guess depends how hard the engine is worked.
Might be added insurance but I guess depends how hard the engine is worked.
1985 LeisureDrive 2.1DJ 5 Speed syncro conversion project.
1979 LT 2.0CH Westy project
1979 LT 2.0CH Westy project
Re: 2.1DJ Oil Cooler
Cheers Matey
I figure on about eight weeks to sort out the poor old DJ. Then again we both are running the worlds' longest rebuild threads
Could be the 1.9 stays in there a lot longer. So may well use the cooler too.
Regards
Stuart
I figure on about eight weeks to sort out the poor old DJ. Then again we both are running the worlds' longest rebuild threads
Could be the 1.9 stays in there a lot longer. So may well use the cooler too.
Regards
Stuart
MaxStu
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
-
- Registered user
- Posts: 1911
- Joined: 10 Aug 2019, 23:30
- 80-90 Mem No: 17004
- Location: Coventry
Re: 2.1DJ Oil Cooler
Technically Mines all done, just needs fitting and running in
1985 LeisureDrive 2.1DJ 5 Speed syncro conversion project.
1979 LT 2.0CH Westy project
1979 LT 2.0CH Westy project
- Aidan
- Trader
- Posts: 6557
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: 2.1DJ Oil Cooler
IMHO keep the whole 2.1 cooling system, it's been run with the fi and everything else, it's easy to swap the oil filter pipe and fit the oil cooler/warmer, auto and tows, and ecu controlled, speed up the warm up, saves the wear on the engine bearings
Re: 2.1DJ Oil Cooler
Yep. Makes total sense. Will fit it.
Whats the technique for removing the longer filter pipe from the poor old DJ?
Regards
Stuart
Whats the technique for removing the longer filter pipe from the poor old DJ?
Regards
Stuart
MaxStu
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
-
- Registered user
- Posts: 1911
- Joined: 10 Aug 2019, 23:30
- 80-90 Mem No: 17004
- Location: Coventry
Re: 2.1DJ Oil Cooler
I'd imagine it's two nut job again, probably a tool for it
1985 LeisureDrive 2.1DJ 5 Speed syncro conversion project.
1979 LT 2.0CH Westy project
1979 LT 2.0CH Westy project
Re: 2.1DJ Oil Cooler
Im not firing on all cylinders myself!
Ive two engines. So there must be two nuts.
There's a joke in this, somewhere!
Ta very much.
Ive two engines. So there must be two nuts.
There's a joke in this, somewhere!
Ta very much.
MaxStu
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".