subaru engine. Cluch confusion

for questions and answers about alternative power transplants on the T25, GTi, Porsche,Subaru etc, this is the place. You must register to post but anyone can read.

Moderators: User administrators, Moderators

Post Reply
bradders89
Registered user
Posts: 185
Joined: 20 May 2011, 18:11
80-90 Mem No: 10541

subaru engine. Cluch confusion

Post by bradders89 »

I have just bought a legacy 2.0 n/a to put in the back of the old wedge. Have been lookin on RJES website but am confused about clutches. Can i get a clutch that will fit i.e a subaru cluch with the spline to fit the vw gearbox. Or do i new to buy the input shaft? Anyone who has done the subaru conversion i would be very greatfull of any advise. Thanks
Top
dubbindaz
Registered user
Posts: 7
Joined: 30 Nov 2011, 19:04
80-90 Mem No: 0

Re: subaru engine. Cluch confusion

Post by dubbindaz »

You can use a subaru clutch with a 228mm vw clutch plate & you need a bigger bearing to fit in the subaru flywheel,Then it will fit a vw gearbox,or you can buy a modified spline Then you can use the full subaru clutch + plate etc.I have mine fitted with the vw clutch plate & its spot on.Rjes sells all you need & the quality of his stuff is A+.Hope this helps
Top
Post Reply

Return to “T25 Alternative Engine Forum”