1z oil breather alternative or back to standard

for questions and answers about alternative power transplants on the T25, GTi, Porsche,Subaru etc, this is the place. You must register to post but anyone can read.

Moderators: User administrators, Moderators

Post Reply
T25boy71
Registered user
Posts: 178
Joined: 21 Jun 2019, 20:56
80-90 Mem No: 16913
Location: Weybridge
Contact:

1z oil breather alternative or back to standard

Post by T25boy71 »

Hi my van has had a 1Z Engine fitted way back in 2005 long before I got it, it go’s ok but has some issues the breather set up has being the first to deal with as it’s been lashed up And oil is going all over the engine I will add some photos tomorrow 
the cam cover has had a small air filter put on a metal tube coming out of where the oil siphon should go
the oil siphon is just floating the under side blocked up 1 pipe from it go’s to the inlet before the turbo Jx the other pipe runs down to the out let on the block.
so I’m thinking is there a better alternative or should I try to put it back to standard 
ps the metal tube looks to be welded in.
:run
 
Vw T25 1.9 TD Z1 hightop rusty but Less rusty than when I got it. lol: 😊

T25boy71
Registered user
Posts: 178
Joined: 21 Jun 2019, 20:56
80-90 Mem No: 16913
Location: Weybridge
Contact:

Re: 1z oil breather alternative or back to standard

Post by T25boy71 »

PhotosImageImageImageImageImage
Vw T25 1.9 TD Z1 hightop rusty but Less rusty than when I got it. lol: 😊

User avatar
Oldiebut goodie
Registered user
Posts: 7259
Joined: 18 Apr 2008, 01:19
80-90 Mem No: 11135
Location: Eastern Angle

Re: 1z oil breather alternative or back to standard

Post by Oldiebut goodie »

I don't know about the rest of what you have there but this hose appears to be twisted and closed off to free passage of anything.

Image
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶

T25boy71
Registered user
Posts: 178
Joined: 21 Jun 2019, 20:56
80-90 Mem No: 16913
Location: Weybridge
Contact:

Re: 1z oil breather alternative or back to standard

Post by T25boy71 »

ImageSorted for now

Image
Dose any one know the part number for the Blanking plate on the block Top photo
Vw T25 1.9 TD Z1 hightop rusty but Less rusty than when I got it. lol: 😊

booted
Registered user
Posts: 33
Joined: 29 Mar 2007, 18:34
80-90 Mem No: 3712
Location: Luton, Club 80-90 mem no 3712,

Re: 1z oil breather alternative or back to standard

Post by booted »

My 1z breather is a solid pipe other tgan last bit into breather on rocker cover

booted
Registered user
Posts: 33
Joined: 29 Mar 2007, 18:34
80-90 Mem No: 3712
Location: Luton, Club 80-90 mem no 3712,

Re: 1z oil breather alternative or back to standard

Post by booted »

My 1z breather is a solid pipe other than last bit where it goes i to rocker cover. Will look for a picture

booted
Registered user
Posts: 33
Joined: 29 Mar 2007, 18:34
80-90 Mem No: 3712
Location: Luton, Club 80-90 mem no 3712,

Re: 1z oil breather alternative or back to standard

Post by booted »

Image

booted
Registered user
Posts: 33
Joined: 29 Mar 2007, 18:34
80-90 Mem No: 3712
Location: Luton, Club 80-90 mem no 3712,

Re: 1z oil breather alternative or back to standard

Post by booted »

Image

booted
Registered user
Posts: 33
Joined: 29 Mar 2007, 18:34
80-90 Mem No: 3712
Location: Luton, Club 80-90 mem no 3712,

Re: 1z oil breather alternative or back to standard

Post by booted »

Image

Post Reply