Longditudal belt set up.

for questions and answers about alternative power transplants on the T25, GTi, Porsche,Subaru etc, this is the place. You must register to post but anyone can read.

Moderators: Moderators, User administrators

Post Reply
User avatar
axeman
Posts: 1118
Joined: 07 Feb 2009, 19:50
80-90 Mem No: 6410
Location: the kent country side

Longditudal belt set up.

Post by axeman »

Hi all I have an aeb engine from my a4 which has a/c and p/s which I need to delite it also has an idle pully that the viscous fan is conected too. Before I go raiding the scrap yards dose any one know exactly what I could replace this lot with so I just have an altinator.
Thanks neil
Back in the game with an uncut 2wd panel van

User avatar
axeman
Posts: 1118
Joined: 07 Feb 2009, 19:50
80-90 Mem No: 6410
Location: the kent country side

Re: Longditudal belt set up.

Post by axeman »

All sorted now after a trip to the local scrap yard.
The audi bracket removed which included the tensioner, altinator. P/S pump. Then a v belt to the water pump. Then back to the crank.
Now cutesy of a 2.0 mk4 golf cabriolet (non a/c) the altinator and its bracket and the water pump pully were removed and bolted on the aeb. So now its crank alt water pump and back to the crank.
Back in the game with an uncut 2wd panel van

Post Reply