Aaz power steering pump setup

for questions and answers about alternative power transplants on the T25, GTi, Porsche,Subaru etc, this is the place. You must register to post but anyone can read.

Moderators: User administrators, Moderators

Post Reply
davidoft1
Trader
Posts: 2591
Joined: 27 May 2009, 18:56
80-90 Mem No: 16628
Location: hayling island

Aaz power steering pump setup

Post by davidoft1 »

Morning folks

So I’m converting my petrol automatic caravelle to syncro , to add to the trouble the syncro has an AAZ with no power steering pump etc, anyone know what I may need to fit a pump to the engine, I hopefully have everything else

Pictures would be handy if possible:)

User avatar
Aidan
Trader
Posts: 6556
Joined: 11 Oct 2005, 19:21
80-90 Mem No: 742
Location: Llanfyllin, mid Wales : )
Contact:

Re: Aaz power steering pump setup

Post by Aidan »


Porkscratching
Registered user
Posts: 616
Joined: 23 Feb 2012, 22:50
80-90 Mem No: 17422
Location: Mid Warwickshire

Re: Aaz power steering pump setup

Post by Porkscratching »

Have you considered electrically assisted PS? Just a thought.
1990 Westy HiTop 1.6 JX
Time is precious, waste it wisely folks.

davidoft1
Trader
Posts: 2591
Joined: 27 May 2009, 18:56
80-90 Mem No: 16628
Location: hayling island

Re: Aaz power steering pump setup

Post by davidoft1 »



Is that petrol or diesel ? I have pump, lines rack reservoir etc

davidoft1
Trader
Posts: 2591
Joined: 27 May 2009, 18:56
80-90 Mem No: 16628
Location: hayling island

Re: Aaz power steering pump setup

Post by davidoft1 »

Porkscratching wrote:Have you considered electrically assisted PS? Just a thought.


My vans factory power steering, just doing an engine change and syncro conversion, I assume as I’m going from petrol to diesel that the bracket are the only real difference

Syncrobaz
Registered user
Posts: 805
Joined: 19 Jul 2010, 21:12
80-90 Mem No: 10610
Location: Wiltshire

Re: Aaz power steering pump setup

Post by Syncrobaz »

Bracket and pump look the same as JX ? There's info on the Samba I googled when fitting mine (JX) biggest problem I had was finding the right pulleys.
Syncronaut no 152
92 RHD mv panel van
94 RHD jx doka 16"

Post Reply