Seems the old past conversion in my van has not had the top bolt on the carrier support bolted to anything.
Does anyone know what needs to be added to allow this to bolt up or if it really even needs it? Is it a part I can buy or need to be fabricated?
Diesel Engine Bar fitting to non diesel
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 428
- Joined: 29 Apr 2009, 17:11
- 80-90 Mem No: 9396
- Location: Bournemouth
Diesel Engine Bar fitting to non diesel
1983 Autosleeper Trooper - 1.8 Gti Conversion
-
- Registered user
- Posts: 859
- Joined: 20 Oct 2009, 18:42
- 80-90 Mem No: 16447
- Location: Somerset
- Contact:
Re: Diesel Engine Bar fitting to non diesel
Mines an original diesel and hasn't got the top bolt either,
1.9D (AEF) pop-top. Aaaaahhhhh........that's better.
-
- Registered user
- Posts: 998
- Joined: 24 Jul 2012, 20:40
- 80-90 Mem No: 14436
- Location: West Sussex
Re: Diesel Engine Bar fitting to non diesel
What top bolt??
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Titus A Duxass
- Registered user
- Posts: 5778
- Joined: 24 Nov 2007, 08:22
- 80-90 Mem No: 4475
- Location: Cologne
Re: Diesel Engine Bar fitting to non diesel
I welded the plates on and fitted the third nut and bolt.
My Pritsche which was a diesel only has two bolts fitted.
My Pritsche which was a diesel only has two bolts fitted.
VW T3 GTi Camper 2,0l