Subaru H6 EZ30 conversion

[Shaundon]

In a moment of madness i went and bought a Subaru legacy outback with a flat 6 3.0 litre engine to transplant into my t25. Thought id keep a thread going of my attempts to do the conversion.

Heres some pictures of the car and engine





Now to try and get the engine and loom out

So heres the first question of many ...
Is it best to put it on axle stands or ramps to get the engine out?

[Smiffo]

Now this I want to see..!!

Which conversion kit do you plan to use, and how mechanically minded are you?
( Have you tried anything like this before? )

I am interested in doing this conversion myself one-day, although prob not H6.
How set up are you for it?
( Do you have a garage to work on the van in? )

Sorry I can't help with the question you asked.

[syncroandy]

Hi, the H6 is a lovely engine, I hope your project goes well.

For removal, the engine is lifted out after supporting the front of the gearbox. IIRC the rad needs to be shifted to allow the engine to be pulled forward off the gearbox. You should check if yours has the pull-to-release clutch as used on the turbos, if so you'll need to disengage the bearing off the back of the pressure plate before pulling the engine off.

E D I T. Soz as you have an auto ignore the last bit.

[Dazco]

Anotherone here watching in anticipation . My legacy is sat at work awaiting the transplant to start. ( only a 2.0 NA )

[Shaundon]

plan to use rjes bellhousing and mount - richard has been really helpful already and suggests i use a pull to release clutch and turbo bellhousing to handle the torque

as its an automatic i need to source a starter motor and flywheel from a manual , probably from a 5 speed impreza wrx turbo (254mm pcd)

did toy with the subaru gears reverse ring and pinion with a subaru gearbox but decided i had given myself enough to do with this project having done nothing like this before.

plan to build it all up in my shed with gearbox and bellhousing all bolted up and check it runs before wheeling it to the van and putting in.

as to how mechanical i am! i do all the servicing / work on my van myself but have never pulled an engine or gearbox. Installed power steering and new trailing arms / brakes etc but nothing this big. Must admit i'm a bit scared at the moment !

need to source an engine hoist to get it out - anyone got any recommendations?

[lloydy]

awesome, look forward to seeing it happen

[Dollytony]

Getting the loom out is just as big a task as getting the engine out!

Here's a link to my conversion (EJ25) might be useful?

http://forum.club8090.co.uk/viewtopic.php?f=12&t=140429" onclick="window.open(this.href);return false;

Good luck with it, always fancied doing a H6 conversion.

[marlinowner]

Regarding an engine crane, I got one of these
https://www.amazon.co.uk/gp/aw/d/B00HUR6XSY?vs=1" onclick="window.open(this.href);return false; to lift the engine and gearbox in my kitcar, which is a heavy cast iron straight six. Managed it no problem but you want a good surface to move it on. Quality seems pretty good for the price although delivery was not the quickest.

[Shaundon]

Regarding an engine crane, I got one of these
https://www.amazon.co.uk/gp/aw/d/B00HUR6XSY?vs=1" onclick="window.open(this.href);return false; to lift the engine and gearbox in my kitcar, which is a heavy cast iron straight six. Managed it no problem but you want a good surface to move it on. Quality seems pretty good for the price although delivery was not the quickest.

That looks pretty good for the money - will those legs fit underneath if up on ramps? or will i have to remove wheels and put on axle stands further back?

[Shaundon]

Here's a link to my conversion (EJ25) might be useful?

viewtopic.php?f=12&t=140429

excellent write up - cheers for that

and my van is the same colour so even more useful

[marlinowner]

That looks pretty good for the money - will those legs fit underneath if up on ramps? or will i have to remove wheels and put on axle stands further back?

Shouldn't be a problem with ramps, you need a clear width of 100cm for the crane.

[Shaundon]

Shouldn't be a problem with ramps, you need a clear width of 100cm for the crane.

good i prefer ramps to axle stands - just need this rain and wind to die down now so i can get out there....

[syncroandy]

awesome, look forward to seeing it happen

x2

PS. Thinking about it as you've got the rest of the car to be shot-of you may prefer to drop the trans and engine out in 1 piece. More to un-do obviously. So lower the lump onto your chosen dolly/sled then re-task hoist to lift up front of car ?

PPS. I've not checked the manual the whole front comes off doesn't it ? Duh.

[Shaundon]

hmm - wonder how high i would need to lift the car.

then again as im scrapping the car after - i could just angle grind the front of the car off and roll it out!!

E D I T....

doh - just read your pps, will check this out tommorow

[axeman]

this should be a fun project, keep up with the updates and progress.

neil