Club 80-90 Forums

they are proper different. have a search on the alt engine forum, its all been done beforeim sure all the info is there, save me retyping it all

yup manifold, in and out, plus the sump (although you could just block off the return) im sure the shopping list goes further, a na airbox etc comes to mind too

jed the spread wrote:philippacman is in the know

jed

all hail the pacman the man that knows

i got 1y in min, read the wiki etc on it, converted from a na so the little power increase was hardly noticable, the torques is great though, 65mph at 45MPG all day, im happy. if your not fitting the turbo you need loada NA plumbin, too much hastle imo, get a AAZ and enjoy the extra bhps. good luck ...

stupid question im sure, but do you mean et 35 is more. The wheels Ive found ar et 50 6.5j 16. was thinking that a 20mm spacer will sort them out and fit them well

Thanks

ill just order one from JK then aviod having to send one back

thanks.

just reading http://www.brick-yard.co.uk/VehicleSpec ... ltwhls.htm

If therefore I want to fit some wheels with et 50 I'll need a 20mm to bring the et to 30

is this correct? thanks

mine are just about dead too, GSF do them £4 each, rubber ones or mr bax does poly ones about 30 a set iirc.

imo you wil most likely need longer studs on the back to fit em if they are alloys. I would reccommed converting to studs on the front too makes fitting wheels a breeze

After picking up a knocking noise the other day, I too a look, offside lower ball joints busted open, left me enough grease to get home :) So I've got another one on order from gsf (42417 £9.50) Is ther any tips or gotchas on this job? Do I have (or is it best) to replace the upper one at the same t...

LB = stereo/tv, lights, water pump etc . keep it

mine goes metal - waxoyl - adhesive (not lots its strong) -marine ply - stick on laminate

works a treat and I didnt have to drill holes into the floor.

wookey

ok i've just done this.. Heres my findings (Yes I know it's all been done :) but i didnt listen! ) running on my 75A /hr battery gives me 4 1/2 hours of beer cooling goodness. great. but like said before its not thermostatic. The manual on my electrolux says it will draw upto 16Amps (not sure how th...

Mine sits just over the light in the middle. Always has, even with its 1y in. goes up abit for hils thats it.

So new engine == new sender.

Where does the temp guage get its reading from? If theres a sender on the rad, then this sender (like sukhoi27 suggests) cud be the problem?

my 1y powered tank is great, upto 50 then it gets noisy, it does 60 happly all day but id like to lower the revs a bit so the plan is to run some 225/75/16s thats a 14% bigger wheel. I know the speedo will be out etc Just wondering if anyone runs this tyre on a 1y/aaz and how does it go? thoughts on...