Club 80-90 Forums

This will almost certainly be the stop solenoid... there will be a tiny bit of dirt (even a very tiny bit can cause this) stopping it fully shutting. Ive usually found just taking it out and putting it bak in usually stops it.

Mmm Im about to fit a new metal framed bed. rather than raise the bed, I am planning to cut off the legs and re-weld the mounting plates... ill let you know how it goes!

Im looking at some domed hubcaps on fleabay. the lady is selling as her ex left them behind and she knows nothing about them except that they are 10" in diameter.

Is there any way I can check that they are not for the early wheels?

Tom

SGS are a fantastic firm - we use them for work a lot and ive recommended them on here before - they cant do enough for you!

mmm if it is the battery itself making the noise - it might have had it, they sometimes make a fizzing/buzzing noise when theyve had it and you try and charge them.

I would get her to disconnect the battery to be on the safe side.

well ive had a good look now and measured the old seals and glass etc. all glass / sliding frames is 4mm - so I think 4.75mm channel will be fine for that. for body panels it lists one as suitable for 0.8 - 1.2mm panels which I think is about right? which leaves the one opposite the sliding door whi...

Hi all I have just found out I can get the window seal with a strip in it through work. However it comes in loads of sizes. I am thinking this is the best size channel: glass groove - 4.75mm Body work groove - 0.6-1.2mm However the window opposite the sliding door has a glass-fibre liner piece that ...

Good Point - Done the signature :D will have to do me avatar soon as well Had to get her out of the shop today for real customers! - done a little bit of putting together, mainly to keep the rain out! just looks better every time I look... which is a lot :mrgreen: :mrgreen: :mrgreen: http://i1210.ph...

Heres one with the doors open, again the camera on my phone is a bit rubbish but its a lot whiter in daylight!

it is - its just the artificial light / poor phone camera make it look really heavy cream - I thought the same to start with, but in daylight when I opened the shop doors its spot on

As requested the topcoat... spent so long thinking about a colour, but plumped for good ol pastel white again... and its shiiiinnnyy!! :D http://i1210.photobucket.com/albums/cc415/fodtommo/CountyofHerefordshire-20120701-00145.jpg http://i1210.photobucket.com/albums/cc415/fodtommo/CountyofHerefordshi...

Thanks guys, it is not too heavy,but a section of it is 'solid' rather than speckled. Im less worried about the seal, it could do with a new one anyway. I have G3 and G5 in the garage any way, but im pretty sure itll need 800/1200 wet and fry first, dont think a cutting compound will do it - and I t...

I had the primer put on the van yesterday, but to my horror have realised that we missed the corner of the pop top when masking up. :( This means I now have 2 pack primer on the pop top seal and a patch of overspray on the roof. Paint on the roof is ok, just needs a good flat and polish. what is the...

Hi Steve Not much but still alot... Ive done all the welding (new rear wing, inner sill repairs, outer sill & side panel myself,B posts, wheel arches etc etc) and all the body prep myself (with the assistance of some good mates - pints owed...) Paint shop is owned by a an aquaintance who is spra...

sorry bout the photos that are sideways, I cant get photobucket and 80-90 to play together