Club 80-90 Forums

1987 T25 DG.
I need to take a lead from battery under drivers seat to the engine bay. Does the T25 have a cable run/channel or will it have to go externally under the vehicle ?

Cheers

When I start from cold and engine warms up, temperature gauge gradually move to correct position at 12 o'clock. After a couple of minutes, the gauge goes back to cold and stays there. Is this a faulty temperature sender ? I have renewed the thermostat a couple of months ago and the gauge was indicat...

Many thanks folks, will give it some attention

Looks neat, well done

Got 1987 1.9 Petrol watercooled DG. Generally the engine runs beautifully with perfect idle tick-over. Occasionally, the idle disappears completely and whenever I stop at a junction/roundabout etc. the engine will cut out. I can only keep it going with some nifty accelerator/clutch/handbrake activit...

I have same problem on my T25. Do you need to take off the door card to access anything the door mirror is fixed to ?

cheers

Yes, used new copper washer. PTFE it will have to be then.

cheers

I did an oil change on my 1.9dg,and put in a new sump plug as the head of the old one was looking sad and been roounded off. I have an oil drip from the sump plug, is it worth dropping the oil out, clean and dry the plug and apply some gasketing compound to try and rectify the leak ? Anyy help appre...

Can anyone recommend a good propriotory cleaner for removing oil stains from patio blockwork. I did a google search and loads came up with very mixed reviews. I also have a spillage that went on the pavement which is tarmac based.

Any help appreciated

Been there a number of times, really friendly site, especially if you have kids.

Thanks for that. I may give him a call to see if he can service/repair a broken blower motor

Apart from tidying up the bodywork and outside areas, the only thing I really need to sort is the heater blower. I had the fascia off yesterday to put a 12v socket on and I didn't have the guts to tackle the blower unit, it looked a lot of hassle. Mine is an Island reg plate,Hi top, and I bought it ...

I went to Hunter and Coombes and they have a good range of stuff and just as cheap as on-line, so got my bits there.

Graham, you're probably right once I get to find them all out, only just got my first camper ! Do we have any garages/mechanics that specialise and are reasonable in price ?

Many thanks folks.

Looks like scews and a slide then.

Cheers

Will give it a go