Club 80-90 Forums

can check both batteries on mine

Yup gunk + kitchen scrubber brush and an old electric tooth brush for the nooks and crannies perfect.

Mine sat for 11 years, we drained the tank and fitted new fuel filter,oil filter an oil,fitted new battery and started and ran fine, bit noisy until the oil got up around the tappets.

just found this
http://www.fuelexpert.co.za/2-stroke-oi ... -study.php" onclick="window.open(this.href);return false;

As Lloyd said check the oil pressure switch on top of the filter, I had the same symptom’s on mine,changed the switch and no more issues. clean the oil up, then use an engine cleaner like gunk, spray on leave it then use an old tooth brush to clean all the awkward bits, i used an old electric one pe...

heres mine pretty straight forward, storage and easy access to engine cover http://i470.photobucket.com/albums/rr62/slippy8v/syncro%203/IMG_5707_zps9d6e37d7.jpg http://i470.photobucket.com/albums/rr62/slippy8v/syncro%203/IMG_5746_zps6adb874a.jpg http://i470.photobucket.com/albums/rr62/slippy8v/syncr...

good question looking forward to see what others have done, been thinking about fitting a solar panel on our Komet.

just checked e-bay and there are repair sets one might suit http://www.ebay.co.uk/sch/i.html?_from= ... =nc&_dmd=2" onclick="window.open(this.href);return false;

check out my build thread it might help.

http://forum.club8090.co.uk/viewtopic.p ... 64&start=0" onclick="window.open(this.href);return false;

got our's recovered a few years ago I was charged around £600 for all the panels, front seats,buddy seat and R+R bed , so probably about right price wise, we put a mattress cover on ours when using the bed or we will end up welded to the vinyl.

We retrimmed our komet with marine vinyl, and had no problems with it, very easy to keep clean just use a baby wipe. Local car trimmer did it. Heres some pice during the refit http://i470.photobucket.com/albums/rr62/slippy8v/IMG_1350.jpg http://i470.photobucket.com/albums/rr62/slippy8v/IMG_1335.jpg ...

Well had the day off and after 2 goes at getting 4th set up I have got as close as I think I can get,slightly adjusted the length of the bar and on the 2nd go managed to get it where it now goes into 4th and stays in place, took her out for a run and have gone up and down all the gears and no more s...

Thanks Aidan

Its not far out, so will give the rear a look later.

300 mile up date, just did this over the weekend on various roads, and every thing is fine except she dropped out off 4th a few times, looks like only a small adjustment needed, so were should I tweak?

Well the old girls back and took her for a good run,well all I can say is it has made an unbelievable difference, all gears up and down the box at various speeds all selecting and feel so much better,no more dash knuckle, parts wise this was a very cheap fix.