Club 80-90 Forums

Probably £3-500 per seat , not sure who I
Would use

I expect It’s the way the curtains attach on the door versus the window frame

I wasn't aware of PKW no, i have just had a quick scan of their facebook page though, cheers for the heads up. Well, i'll probably give it a miss. The engine is currently fitted to a t25, so not sure what they have done regarding tinware. If it’s rocker cover or push rod tubes ( which is quite like...

Ps nearly all the tinware is different

That has been my plan to be honest. The leak is pretty small, but leaks onto the exhaust, which is just annoying as it stinks. I can't find the tinware anywhere for over the cylinders. Brickwerks have one side, but not the other. It is expensive from Brickwerks (as it should be). I've asked on here...

Keep the 2ltr , you really need a different gearbox to suit the 1700, less torque low down more revvy

Most air cooled have Small leaks, it will still be an unknown

I’ve bought both cheap and expensive, cheap ones slightly noisier but was on mine for 12 years with no issues, I’ve fitted a few and no issues with any of the cheap ones

Eberspacher

You can change them without removing the heads but you have to cut the push rod tubes and replace with telescopic ones

If you present it for the MoT with the bed out they can't test them! Or look for them. ( there are no seats then ) This did actually cross my mind. I'm now wondering how I'm fixed as the fail is now on the system I can't simply take it somewhere else surely! You can take it back for retest they wil...

If you have a high top the gutters are different to a tin top , pretty sure AH Schofields sell replacement gutters

I have a NOS steering lock and some used ones too, any pictures of your setup ?

it can be done on situe , if its a ve pump a seal kit is around 30, brickwerks etc sell them 

Can’t see any down sides personally, add on electrical is probably the easiest and cheapest

The twin tip gt one doesn’t fit ( unless they have modified it within the last few months , it touches the rear valance a lot , stock ones are pretty good, the vintage speed ones tend to get crazy hot and burn the paint off the valance