Club 80-90 Forums

Aidan wrote: ↑17 Feb 2021, 08:00 just a heads up the tumbler kits (all 4 wafers and springs about 16 locks worth) are available again from VW Clasicparts, price has gone up a bit mind

How many wafers and tumblers in a set, any idea?

Good Afternoon, I've just been reading your thread. Email me if you want wafers or springs, mine is the EBay advert in the link above.  I'm more than willing to help out anyone in the T25 world as I'm an owner myself.  The price above accounts for Ebay and Paypal fees and postage so overall for a se...

Good Morning All,
I have new wafers & springs and can rebuild locks to match existing keys.
If you need my help please feel free to PM me or email brendanetheridge at hotmail.com
Regards
Brendan

I have tumblers and springs available - contact me for further details.
Regards
Brendan

Just to tack something on the back of this old thread, I have a stock available of wafers and springs for rebuilds.
Therefore I can match your locks for you at a reasonable cost.
PM me if interested.
Thanks
Brendan

@silverbullet It was the comment from the Brickwerks link that prompted my post: "Wheels with a ET of less than 30 tend to stick out more and give the vehicle a feeling of not wanting to do much more than going in a straight line, wheel bearing load will be increased, steering will be heavy and...

Good Afternoon, I've been looking at all of the 'new' 14/15" T25 alloy wheels on offer from EMPI, JBW, FLAT4, SSP, etc and they all seem to have an offset of 20 or 23. Having been doing the necessary reading on the subject I understand that the standard Et was 30 or 39 depending on fitment of a...

Yeah both electric choke flaps shut when cold.

Any other ideas?

I have a 1982 2.0 air-cooled T25 that does not start well from cold, the only way to get it going is to put your foot flat on the floor and turn until it starts firing. Keep turning over on the starter and then let it creep into life, it runs on two/three for a couple of minutes then is fine. I thou...

Took the speedo out and the main drive cog from the worm gear had fallen off! Replaced with superglue and we'll see how long it lasts!
Thanks for your help.

Is the U channel the same as JK's J13499?

The odometer has stopped working in my T25. The speedo still works fine.
1982 2.0L Aircooled.

Any ideas on what the fault is and how to fix it?

Thanks

Whats the difference between a B6ES and a BP6ES please?
Any problem with using one or the other on a 2.0 Aircooled CU?
Thanks
Brendan

I just checked my GSF invoice and seems like I've put late outer bearings into an early van.

Logbook says first registered 04-08-82...

Anyone know what the difference is, and why it would cause this problem...

Thanks
Brendan

I got them from GSF...

Do you know what the difference is between the 2 types?

Brendan