Club 80-90 Forums

Thank you jas915 after running her for a bit indicators are all working.

I will give it a go tomorrow thank you for the tip .
I thought I had missed a wire as there is a empty spade conecter behind fuse 11

Ok so new relay in and new stalk new fuses to 11 and 9.still no indicators. On the back of fuse 11 there are two spade connectors only one has a wire connected. Can you please tell me if both connection spades should have wires to them please.

I will have a look in the morning Steve thank you so much

Thank you all I will get this all checked I'm not good with electrics lol all bulbs are fine none dull.
I know the switch at stalk all had a good feed yesterday a friend checked for me and said I'd have to trace a wire back to the relay.
Thank you for your replys

ok so new radiator fitted new heater motor fitted dash back in all working apart from indicators :( four hours trying to sort it and find fault but cant find it . earth crowns cleaned and new connectors  green light working on dash hazards working and new fuse. i have ordered new relay and stalk . a...

Has anyone used foam tape to redo the flaps in the heater box. If so how thick does the foam need to be

Thank you is there not a after market one as money is a bit of a issue 

Hi how do i know what radiator to get , have removed the old one cant find any numbers on it apart from 85 in a circle and vw with the three Audi rings. my camper is a 85 devon caravette 1.9 water cooled. pretty sur the one i have taken out is the original looking at the state of it and the rust can...

not sure what i done . Had a wiggle with some of the wires and all working again thank you

Ah thank you Sir i will go and have a look

can anyone point me in the right direction please. I have side lights and indicators work with side lights but if i put main beam on indicators dont work nor dose main beam. I have checked the fuses but all ok .

Thank you itchyfeel not far from you lol i am in west end . i have a pale green and white Devon Caravette

thank you Itchyfeet its all out and replacements should be here monday

Hi Guys can anyone tell me if and how you can replace a cam follower with engine in and what the procedure is . sorry its on a 1985 19oo water cooled . Have a very bad clacking on no 1. a friend had a look to see if it could just need tighten but it wont and is very wobbly, so he removed it and the ...