Search found 4 matches

by studog
31 Mar 2022, 12:45
Forum: T25 Alternative Engine Forum
Topic: 1Y engine questions
Replies: 6
Views: 1803

Re: 1Y engine questions

Ok thanks.  I am very confused by this as the solenoid is different internally to that one and there is a loose piston and return spring inside the pump.  If anything the pin in the solenoid would push this further into the pump.  But the pin does not move when the solenoid is removed and connected ...
by studog
31 Mar 2022, 11:33
Forum: T25 Alternative Engine Forum
Topic: 1Y engine questions
Replies: 6
Views: 1803

Re: 1Y engine questions

The wax stat on the side for the advance seems to be working ok although it does not move far. The stop solenoid has no visible movement or noise when removed and connected to power. As far as i can see there is nothing else in the fuel system.  Is there an air shut off in the inlet somewhere to shu...
by studog
31 Mar 2022, 09:43
Forum: T25 Alternative Engine Forum
Topic: 1Y engine questions
Replies: 6
Views: 1803

1Y engine questions

Please excuse the basic question but Diesels are still black magic to me!  Petrol makes so much more sense! After lots of starting and running issue finally traced back to air leaks (I think) It now starts stops and drives fine.  But.... The stop solenoid on the fuel pump does nothing when power is ...
by studog
07 Apr 2009, 19:44
Forum: Mechanical
Topic: Weber Carb Set Up - struggle under acceleration
Replies: 9
Views: 2012

Re: Weber Carb Set Up - struggle under acceleration

If snap throttle openings work from above idle then the pump is working fine. If it's just off idle try richning the mixture 1/8 of a turn (turn anticlockwise) and try again. Keep trying till you get what you want. You should be able to smooth it up ok. But a diapraghm is only a few quid so it's wor...