Club 80-90 Forums

I took the cap off as there was air in the top of the header, with the use of a big rag to stop my hand from melting! Obviously the air escaped pretty sharpish and it did over flow a bit, I then stuck in my thermometer from my pressure testing kit. I have a 1.7 diesel by the way
Cheers

Hi Does anyone know what the temp of the coolant should be? Iv just measured mine inside the header and it was 90 degrees C, after a 25 minute run. The reason I ask is because my temp gauge is reading at about 3/4 prob just over! I also found that the "dalek" cap on top of the header is no...

I recently replaced my scrapers for the same reason, they still leak now! Is this really normal?? Cant find any drain holes

jimi

Roger

Some how lost my heater knob, any body know where i can get a replacment?
Cheers

I'v got the whole kit from JK had it in for over a year now and am soon to be ripping it out as the coating is chipped all over the place and the MDF doesn't really seem strong enough. I'm going to replace it with ply, wish I had to start with now as I payed full price. It initially looked good but,...

Sorry forgot 1.7 diesel

Going to install a oil press gauge and get rid of the buzzer.

Does anyone know what pressure it should read, if all good?

Cheers

I think so too, I did have white wall flaps fitted looked sweet for a couple of months but started shredding the shizzle out of the tyres

Thinking about some replica Fuch, still not decided yet too many to choose from. I like the retro look

Think yours would definitely weigh more than mine! Nice lights by the way
Jimi

Afternoon all Am in the process of buying some new alloys, the weight rating for each is 715kg. I have a panel van with home brew interior rock n roll bed etc, im not sure of my total weight. Does anyone know the weight of a standard panel van 1.7 diesel. Also do you think the 715 kg per wheel would...

i have lowered the bus and got the tracking set but not the camber, this was over a year ago now and have not yet noticed any wear to my tyres.

Should I get the camber checked out to be safe?
Cheers

Didn't realise it was such a big job so going to give em a spray
cheers everyone
Jimi

Are these the ones?
http://www.brickwerks.co.uk/components/ ... 1bdfc7.jpg" onclick="window.open(this.href);return false;