Club 80-90 Forums

Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

They are better made, stronger, not plastic bases but alloy, improved visibility tge list goes on. I recently converted a friends van and I couldn't believe how poorly made thin plastic etc on the original mirrors


Sent from my iPhone using Tapatalk

Cheap kits do fail early, it's well documented on all the forms, my concern would be whether a mobile mechanic knows to leave play rather than tighten right up? Not all bearings seat the same and need same technique to fit


Sent from my iPhone using Tapatalk

Mercy! Now that's a resto!!


Sent from my iPhone using Tapatalk

Amazing how much magnetite type rust patches can seen solid until you go hard with a cold chisel and club hammer and it falls away leaving only thin metal left and a lot of rebuilding !


Sent from my iPhone using Tapatalk

Cheers Colin, remember it well. Mine is thick at the rear and thin at the front so I may cut a large square out and as you wisely say leave an adequate gap for weld penetration. I am considering cutting it all out but am port operative so welding is ok but crawling underneath with heavy jacks ain't!...

https://uploads.tapatalk-cdn.com/20220614/291345ef5e2e6b049b1d816dd5080062.jpg https://uploads.tapatalk-cdn.com/20220614/11c2892a7132ba4b8bec7cb11a0adbaf.jpg https://uploads.tapatalk-cdn.com/20220614/e3d29f297804730419467a690c59008b.jpg Aiming to cut out top of jacking point/hanger, weld in new 3mm...

I would post on the t25 club on Facebook and also try Big Red spares for that pipe unless you can bend the ends of a stainless pipe yourself , I always wonder why I don't have a tube bender, but only on those few occasions when I need one ! Good luck and good work. NB the DJ runs very well on lpg wi...

Thanks Sweetas, that should help, I'm fitting a different relay, appreciate the diagram.


Sent from my iPhone using Tapatalk

https://uploads.tapatalk-cdn.com/20220327/aad61ebd69b8e7c13ac89ab12d991edd.jpg Can anyone help identify some wires on my 83 West split charge relay. I'm updating it to a slightly more modern replacement with thicker cable. There are the two main red wires running to each battery, then a red/black w...

Try Nick Tine, Elvis Summers, T25 Facebook forum, there are a few people that sell wheels


Sent from my iPhone using Tapatalk

Bad luck !