Club 80-90 Forums

No probs spoke to Steve on the phone, getting a full service aswell while its in, top man is Steve.
Thanks again

My money's on the play in the wheel bearing. Yep it looks that way (I think) I checked everything within my limited capabilities and can't find anything wrong so if it is the bearing then I don't have the tools to do it. The vans going in for its LPG reset soon so Im going to ask Mr Shaw to have a ...

not sure about the noise but the drive shaft should move in and out.............. Cheers Dazzzer1, just wasn't 100% sure sounds like it could just be the drum rubbing on the backplate. Just check all round the drum for clearance, and if it's rubbing bend backplate away gently. Can also happen after...

Try here
http://www.manchesteraircooled.com/aboutus.html
My mate uses them as says they re great, or travel a bit furth to Chester and see steve at Gasure. I get mine done there you can't go wrong there.

Hi folks Friday night I noticed an odd noise coming from the OSR wheel. It sounds like metal grinding against somthing as the wheel turns, its not constant as though something on the wheel is catching somthing else as it rotates, so got home and checked out the wiki and previous posts, Saturday jack...

I am still looking for an alternator adjuster tensioning bracket for a 1984 1.9 DG PETROL engine. I have the long bracket that you slide the alt up and down to adjust the tension, if that the one you need Pm your address and I'll pop it in the post http://i217.photobucket.com/albums/cc55/72blackbug...

All sorted now it was the PCB
Thanks for all the advice on this one folks much appreciated and HUGE thanks to Aidan who not only had a spare PCB but also fitted it and mended the rear of the clockset where it was damaged when I went to collect the PCB, what a guy.


Mark

Right then Ive checked and cleaned the earth crowns and took the clockset out to check the PCB and its in a right state looks like someone has already tried a repair using the silver paint stuff and there are some screws missing that hold the PCB in place, the issue with the lights has gone but now ...

Hi, I used DC fix see thread http://forum.club8090.co.uk/viewtopic.php?f=11&t=66673

Some on ebay http://cgi.ebay.co.uk/D-C-FIX-CHEQUERED ... 2c562cd9a3

Cheers guys, I'll check all the earth connections and PCB in the morning as I have now opened a bottle off red

Thanks Big Tam I'll check the PCB later Im just getting dragged out to ASDA (oh joy). Hopfully I'll sort it before getting an auto spark out or replacing the whole dash . Im quite persistant (and a bit tight with my cash ) so all advice is most welcome

I seem to have a strange electrical issue with my headlights, When the ignition is on and I switch the side lights or dipped beam on the blue LED full beam light comes on but the lights are dipped if I click the stalk back the full beam comes on and the blue LED goes out also the dash lights do not ...

Hi don't know anything about the Vulcan 240 thing but your fridge will only have one plug for the 240v feed, the 3way fridge runs off Gas/12v/240v Gas obviously comes from your gas tank/botttle, 240v for when your on hook up and the 12v is wired to your alternator via a relay which will run your fri...

Cheers Gary, the seats are not looking so good now thanks to a baby and a bottle of OJ but they will do until I can get them profesionally upholstered.

Its been awhile since I updated but work and family have slowed progress quite a bit, so interior done new control panel made and Leisure battery moved to the wardrobe with a split charge fitted. http://i217.photobucket.com/albums/cc55/72blackbug/DSCF1185.jpg http://i217.photobucket.com/albums/cc55/...