Club 80-90 Forums

Hi I wonder if anyone can help, I've got an original 5 part spoiler that I took off my auto sleeper and I wondered what is worth to put it up for sale for? I had to cut around the plastic in two or three places where a couple of the nuts would not come undone but it would fit up with the normal bolt...

H I am probably well off the mark but will 205's fit onto standard 14" steels or only VW alloys, apologies for stupidity!

When i was considering a uber high top I looked at loads of different high tops before i settled on an autosleeper trident and now i love it, i looked at Westie's which although aesthetically big can look quite cool and having had an atlantic pop top, I think that they have a really good arrangement...

Could you possibly take a pic so I can see how you mean, my large table also goes behind driver i didn't know you could fit both there?

I had one for the t4 and it was very well made and strong, would definitely recommend.

It's weird it looks original aswell, can't find anything in my AS handbook!

I am clearly a lucky person as in the trident I have a brown leg for the table in the back, a brown slightly shorter leg for the table between the front seats but I also appear to have another leg made to the same spec which is about 6" long and won't fit to either leg as both ends are tapered ...

Many thanks for the reponses im getting out there with the punch tmrw and mash it together

Sorry dude I'm being a bit thick did you use a centre punch to push the metal down to make the hole square? And if you put a washer inside the cap is at to stop it going all the way through and did you put the circling back on the outside? I am probably having trouble imagining it I will have to go ...

I wonder if anyone can help, my speedo has stopped working and I have traced it back to the circlip keep coming off the end of the cable through the grease cap. Before it wore the square hole on the grease cap into a round and I replaced it and it was fine for a while. It it has done it again howeve...

Mate just get any set of alloys and sand them off undercoat and rattle can them with gloss or silk, you can get a cheap set of load rated alloys from eBay, bore them out get longer studs and spacers (to the correct offset) and fit them up. It's easier than it sounds. I got a set for sale on the bay ...

Let me know how you get on coz I need to get mine off!

Thanks for the thoughts,It kind of lags a bit but I thought it was the holes in the backbox, I patched them up and it has improved a bit II just thought the lag was part of the deal with the van. Would it be better of the vacuum dizzy needs replacing to swap for a 009 or one without the vacuum?

http://i109.photobucket.com/albums/n73/justicewhittle/089d9712.jpg http://i109.photobucket.com/albums/n73/justicewhittle/7f824d99.jpg I'm not particularly mechanically minded but I wondered if anyone might be able to help. When I was looking over the engine earlier I noticed that one of the vacuum ...

Yes However my £18 a week train ticket to work is about £60 petrol a week in the bus so don't drive every day unless it snows and trains stop!