Thanks for the reply.
Sorted
Had pully set at wrong timing mark.
Search found 91 matches
- 30 Jul 2020, 16:06
- Forum: Mechanical
- Topic: Adjusting tappets
- Replies: 3
- Views: 701
- 30 Jul 2020, 14:52
- Forum: Mechanical
- Topic: Adjusting tappets
- Replies: 3
- Views: 701
Adjusting tappets
Hi all looking for a bit of help.
Tried ot adjust tappets today ,
Loosened lock nut , backed off adjust screw
Tightened till touching no rocking.
But thats as tight as it will turn can't get the two full turns .
Any ideas as I don't want to force it damaging screwdriver slot.
Thanks
Tried ot adjust tappets today ,
Loosened lock nut , backed off adjust screw
Tightened till touching no rocking.
But thats as tight as it will turn can't get the two full turns .
Any ideas as I don't want to force it damaging screwdriver slot.
Thanks
- 20 Jun 2016, 23:08
- Forum: Mechanical
- Topic: Engine cuts out after 1200 miles!
- Replies: 4
- Views: 1523
Re: Engine cuts out after 1200 miles!
I'd say ignition amplifier. Mine went a couple of years ago. stopped dead. Got second hand one, It was a bit different than my one it had cooling plate. Banged in, off she went. Not being the same as old one was a bit worried so I got new one. Anyhow about a month ago van started to die spluttering ...
- 19 Jun 2016, 19:19
- Forum: Mechanical
- Topic: I think I cooked me fan
- Replies: 9
- Views: 2037
Re: I think I cooked me fan
I spoke to soon.
Tried fan again before fitting grill.
Nothing on low speed.
Nothing on high speed,but I can hear relay clicking on high.
Tried fan again before fitting grill.
Nothing on low speed.
Nothing on high speed,but I can hear relay clicking on high.
- 19 Jun 2016, 14:38
- Forum: Mechanical
- Topic: I think I cooked me fan
- Replies: 9
- Views: 2037
Re: I think I cooked me fan
Thanks lads sorted!
Had not seen relay above fuse box.
So I didn't go near that.
I know where it is now for next time.
Just unplugged plug on back of fuseboard
For relay 24 and remade it.
Checked all connections.
Hey presto fan on both speeds
Had not seen relay above fuse box.
So I didn't go near that.
I know where it is now for next time.
Just unplugged plug on back of fuseboard
For relay 24 and remade it.
Checked all connections.
Hey presto fan on both speeds
- 19 Jun 2016, 12:27
- Forum: Mechanical
- Topic: I think I cooked me fan
- Replies: 9
- Views: 2037
Re: I think I cooked me fan
Where is 50amp fuse?
Changed over relay with fog lamp relay.
Changed over relay with fog lamp relay.
- 19 Jun 2016, 11:51
- Forum: Mechanical
- Topic: I think I cooked me fan
- Replies: 9
- Views: 2037
Re: I think I cooked me fan
Checked 30a fan fuse in fuse box
Not sure what stage came on.
Thanks
Gally
Not sure what stage came on.
Thanks
Gally
- 19 Jun 2016, 11:47
- Forum: Mechanical
- Topic: I think I cooked me fan
- Replies: 9
- Views: 2037
Re: I think I cooked me fan
Thanks for the reply.
The fault must be between plug and the fan.
Or maybe earth problem.
I have 12v at plug.
Strange that it came on once.
The usual fitted new fan belt ,new temp gauge sender as gauge not working. 2 fixes equals 1 breakage.
Won't get near it today pissing rain outside.
Thanks again.
The fault must be between plug and the fan.
Or maybe earth problem.
I have 12v at plug.
Strange that it came on once.
The usual fitted new fan belt ,new temp gauge sender as gauge not working. 2 fixes equals 1 breakage.
Won't get near it today pissing rain outside.
Thanks again.
- 17 Jun 2016, 20:18
- Forum: Mechanical
- Topic: I think I cooked me fan
- Replies: 9
- Views: 2037
I think I cooked me fan
Hi all In a spot of bother. I was checking my fan was working. I shorted centre pin and outer pin, fan came on no scraping sounded smooth. I then shorted center and other outer pin, nothing. Thinking I might have got it wrong I tried the two outer pins no fan. Now no mater what combination no fan at...
- 15 Aug 2011, 19:25
- Forum: Bodywork, Seats & Glass
- Topic: surf rack
- Replies: 2
- Views: 673
surf rack
hi i am planning to put a surfboard rack on the side of my high roof.
gonna use standard clamps on gutters and use screw fixings on the westy roof .( already there)
so im looking for any good pics or info from any one who has done this.
thanks
gally
gonna use standard clamps on gutters and use screw fixings on the westy roof .( already there)
so im looking for any good pics or info from any one who has done this.
thanks
gally
- 15 Aug 2011, 19:04
- Forum: Any Other Matters
- Topic: Any tips on how to remove the side water cap?
- Replies: 4
- Views: 1562
Re: Any tips on how to remove the side water cap?
i used a screw driver..
then a new one. vw bus shop do them
gally
then a new one. vw bus shop do them
gally
- 09 Jul 2010, 20:34
- Forum: Mechanical
- Topic: oil filter for a 1.6td and oil too
- Replies: 5
- Views: 737
Re: oil filter for a 1.6td and oil too
w940/25 is the filter your looking for
- 15 May 2010, 17:31
- Forum: Mechanical
- Topic: hydraulic lifters
- Replies: 9
- Views: 983
Re: hydraulic lifters
castrol now recomend 10w 40 (cos they are getting rid of the 15w40) tried it once got better mpg but the van did not run as smooth or as quiet it runs better on 15w 40. castrol seem to make it up as they go along always recomending the most expensive. i hav a 96 bmw 318 and castrol now recomend full...
- 25 Feb 2010, 21:30
- Forum: Electrical & Instrumentation
- Topic: wipers blowing fuse
- Replies: 2
- Views: 636
Re: wipers blowing fuse
thanks 1664
i know its not advisable to simply up the fuse
but the last time the fuse blew it got me home in the rain.
the wipers are not slow or struggling.
and it dosent blow straight away it might last a day or two
ill guess ill take out motor and have a gander
i know its not advisable to simply up the fuse
but the last time the fuse blew it got me home in the rain.
the wipers are not slow or struggling.
and it dosent blow straight away it might last a day or two
ill guess ill take out motor and have a gander
- 25 Feb 2010, 13:49
- Forum: Electrical & Instrumentation
- Topic: wipers blowing fuse
- Replies: 2
- Views: 636
wipers blowing fuse
please can anyone tell me why my wiper fuse keeps blowing.
i have put a 20amp in for the moment.
10 amp works for a while then blows
i have put a 20amp in for the moment.
10 amp works for a while then blows