Club 80-90 Forums

X TYPE PATS WORK AROUND BASICALLY THE CLOCKS NEED TO BE THERE.... SO FROM THE ECU PIN 39 WHITE GOES TO OBD2 = DONT KNOW THE PIN YET PWM ECU PIN 88 GREEN GOES TO PIN 6 OBD2, THEN GOES ON TO PIN 18 AT THE SPEEDOMETER ON THE IP10 SIDE ECU FROM PIN 89 YELLOW GOES TO PIN 17 ON THE SPEEDO ON THE IP10 SIDE...

2.0 JAGUAR V6 ECU PINOUTS - I THINK THERE ARE SOME MISSING BITS, DLC AND PATS IN https://i.imgur.com/NedWR3W.jpg ITS A EEC-V 104 PIN ECU JUST LIKE THE MONDEO AND ALL FORDS 1998-2006 https://i.imgur.com/SWNHvw5.jpg GOT A JAG STICKER ON IT https://i.imgur.com/XlGLEZO.jpg SAME 104 PIN PLUG AS EEC-V THE...

http://jagrepair.com/images/Electrical/ ... 0Guide.pdf

its in the clocks
how do you get it out the clocks

oh and they are really lightweight engines erm just make sure EVEN if you get a st220 3 litre or a 2.5, that you get the ecu FOR it and the loom from the ecu to the engine IF the square plug to the fuse box is all that you have, its really no drama as you CAN get all the other bits as i just did as ...

https://i.imgur.com/yUcsWTR.jpg yes, so the early 2.5 mondeo mk1 and mk2 use the early block with this pattern https://i.imgur.com/jNDQfIV.jpg the later mk3 mondeo uses the 3.0 block with liners to bring it down to 2.5 BUT its a different 2.5 ish https://i.imgur.com/luIQrLu.jpg my plan was to use t...

yes cant upload pics

(1) ford mondeo 2.5 v6 stock oem ecu pats cougar contour aj25 aj30 duratec - YouTube


 

i dont think i have img privillages yet not enough posts
 

early ford v6 ecu with imrc output ? what is it outputting, can you trigger a relay and send power to the diverter flaps and on off solenoids in the early s type vvt this is the info for them So according to one of the manuals it is indeed a two stage system which advances the inlet cams 30 degrees ...

EEC-V FORD CONTOUR 3.0  AUTOMATIC 1998  - 2004 1. SOL-B SHIFT SOLENOID B 2. MIL MALFUNCTION INDICATOR LAMP 3. 0 4. 0 5. 0 6. 0 7. 0 8. 0 9. 0 10. 0 11 EVAP CANNISTER 12. 0 13. DATA LINK 13 OBD-2 14. 0 15 DATA LINK - OBD-2 16 DATA LINK + OBD-2 17. 0 18. 0 19. 0 20. 0 21. CRANK POSITION + 22. CRANK PO...

S-TYPE 3.0 V6 1999-2002 VVT SOLENOID VALVE (REDUCED) (autoreservejaguar.com)

early 3.0 s type vvt solenoid
so it does have it then

or can you run the imrc feed from the 2.5 mondeo, to the vvt's and the s type plenum diverters, if you liek switch ing a relay or something like that
 

Ford Transit Forum • View topic - My mk5 smiley V6 Jag engined van

jag 3.0 on cougar loom
its all about the iac 
idle air control valve

canbus fly by wire pedals dont use an iac, as the idle is controlled elastictricerly
i.e. it knows from vss vehicle speed sensors its standing still
 

ooh,
the thing i forget
when using the stock ford ecu
you can connect it to forscan
do the diagnostics on the lap-top
which is nice

Mondeo ST24 fixing a faulty IMRC - YouTube
imrc repair
no wonder they did without it

 

scraTCH that
the 2.1 jag has the pats in the clocks
bugger

so its
if you do for example buy a complete 2.1 jag
and have the keys
what is the pats bit in the clocks and can you remove it and use it
withough having the complete clock bit

 

well, i am glad i typed it all out as it got me thinking IMRC intake manifold runner control so the ecu can send out signals to change this, operate a motor to pull some flappage in time with engine speed or demand now here is the crux I BET  on a modern can bus engine with vvt it both controls the ...