Search found 6123 matches
- 10 May 2024, 18:37
- Forum: Mechanical
- Topic: Help needed with DF to DG engine change
- Replies: 2
- Views: 78
Re: Help needed with DF to DG engine change
Yes, you need the DG throttle cable , dont try bodging it , they are nasty when they stick wide open !!!
- 07 May 2024, 23:11
- Forum: Mechanical
- Topic: DG engine vacuum hoses?
- Replies: 4
- Views: 131
Re: DG engine vacuum hoses?
Just blank it off , it operated the hot/cold feed off the exhaust which is not needed in uk climate , it’s one less thing to worry about
- 07 May 2024, 20:00
- Forum: Mechanical
- Topic: DG engine vacuum hoses?
- Replies: 4
- Views: 131
Re: DG engine vacuum hoses?
The other vac pipe goes from the base of the carb to the air box , and you can just blank it off on the port on the base of the carb and , as long as its blanked off airtight , forget about it
- 07 May 2024, 19:42
- Forum: Electrical & Instrumentation
- Topic: Probably not right...
- Replies: 4
- Views: 138
Re: Probably not right...
I would expect the ePas to be on the main ignition switched feed
- 06 May 2024, 18:52
- Forum: Mechanical
- Topic: Crisis may be looming?
- Replies: 11
- Views: 359
Re: Crisis may be looming?
How about sorting the leak first ? Actually get under it and clean everything off and dry it all so you stand a chance of seeing what is the issue . Fill it up with water (not coolant) and watch where its coming from , before going down it doom and gloom route . It may well be coming from a hose or ...
- 03 May 2024, 15:52
- Forum: Electrical & Instrumentation
- Topic: Help needed
- Replies: 8
- Views: 302
Re: Help needed
Sorry i want awake , and was getting frustrated …… i will remove my bit on the post
- 03 May 2024, 09:36
- Forum: Mechanical
- Topic: Failure of plastic gear linkage bush
- Replies: 3
- Views: 182
Re: Failure of plastic gear linkage bush
Where dis you buy it ? JK?
- 03 May 2024, 07:47
- Forum: Electrical & Instrumentation
- Topic: 1.9DG electrics
- Replies: 25
- Views: 630
Re: 1.9DG electrics
Morning
Engine bay loom is not that complicated , post some pictures of what you have got and im sure we can sort it out …..
Engine bay loom is not that complicated , post some pictures of what you have got and im sure we can sort it out …..
- 02 May 2024, 21:03
- Forum: Electrical & Instrumentation
- Topic: Help needed
- Replies: 8
- Views: 302
- 01 May 2024, 22:33
- Forum: Any Other Matters
- Topic: Knocking from ventilation system
- Replies: 21
- Views: 6593
Re: Knocking from ventilation system
Last time it did a heater motor it took me a full day from driving in to driving out , but that was only dash out , heater box out , swap the fan motor and put it back together , with several brews and tidying of bits under and around the dash …. I wasn’t rushing, nor charging by the hour , could we...
- 30 Apr 2024, 22:34
- Forum: Electrical & Instrumentation
- Topic: Headlight switch
- Replies: 14
- Views: 363
Re: Headlight switch
Have you checked the “x” relief relay ? And the ignition switch ?
- 30 Apr 2024, 21:31
- Forum: Mechanical
- Topic: Early Slding door Catch fouling on door card
- Replies: 19
- Views: 378
Re: Early Slding door Catch fouling on door card
You can swing the sliding door out of the way to adjust the hook , have a axle stand set at the height of the bottom of the door and roll it open until the middle hinge roller is at the gap in the track and lift it off and then the door will be out of the way and rest it on the axle stand , or remov...
- 30 Apr 2024, 18:18
- Forum: Mechanical
- Topic: Early Slding door Catch fouling on door card
- Replies: 19
- Views: 378
Re: Early Slding door Catch fouling on door card
The retaining stop is not stopping the hook ?
- 30 Apr 2024, 18:12
- Forum: Mechanical
- Topic: Van Running wierd (popping) and erratic rev counter
- Replies: 9
- Views: 226
Re: Van Running wierd (popping) and erratic rev counter
The fact the rev counter is erratic at the time the misfires happen says the coil is the first place to start looking, as the rev counter gets its signal from the coil directly
- 27 Apr 2024, 16:37
- Forum: Mechanical
- Topic: Clutch woes
- Replies: 5
- Views: 241
Re: Clutch woes
Quite possibly, personally i wouldnt buy a coffee from JK, it would turn out to be tea or muddy water when it arrived …. Brickwerks everytime