Club 80-90 Forums

The 12V 3mm ones are not as widely available and you might as well fit a superbright 3mm white one if you are leaving the blue insert in. It takes about 40 seconds to replace the resistor (1p each) and you can use virtually any standard 5mm Blue LED for a 'fit and forget' mod. Best of luck with you...

nice cheap camper here or to this type of standard. look for a Devon, LeisureDrive, Autohomes, Autosleeper, Reimo, holdsworth as they are converted by factories to be well equipped campers. as for maintenance... you'll either have to learn how to do the simpler stuff.. or face specialised garages, ...

If you have replaced with a 3mm 12V LED no need to change the 100 ohm resistor, if you have a standard (non 12V) Blue LED then it will not last very long with the 100 ohm series resistor. I got one from VW, but I have to say it's as dim as a 'Toc H' lamp. Unfortunately the guy dealing with it is on...

New to the camper scene. Is it acceptable to store an unconnected partially used gas cylinder ( Campinggaz 907) on its side underneath the passenger front seat, Or is the on its side storage dangerous/un acceptable ?? cheers Seems OK to me...so long as when you come to use it you stand it upright f...

cheers for the replies I've managed to get a replacement top for it so for the time being I'm gonna stick with that. Looking around I see fiamma do a turbo one with a built in fan, has anybody fitted one of these? Are they noisy? Where did you run the wires I fitted a 3 speed Omnistor to my van, bu...

There was a 36cm one on fleabay, it could still be there.

TR

There is a bit in the Wiki under bunks. You can fit a bunk across the cab area above the seats, use the door pillars for the cups, Justkampers do a kit. http://shop.justkampers.com/advanced_search_result.php?keywords=Bunk+bed Older type caravans used to have removable bunks consisting of 4 cups 2 po...

AngeloEvs wrote: Red bulb or red LED? The LED housing has a little blue insert for the main beam light and this can be pushed out, since yours is red and the insert is blue then you wont see much at all if you leave it in. Ah! ... so all I really need is a BLUE insert then, as the bulb is OK? UPDAT...

It should already be undersealed from new, mine is/was.

And very well sealed it is too.

TR

Red bulb or red LED? The LED housing has a little blue insert for the main beam light and this can be pushed out, since yours is red and the insert is blue then you wont see much at all if you leave it in. Replace it with a Blue LED and change the resistor or keep to red. I thought the main beam wa...

CovKid wrote:Or as I did, dip in black paint first - still shows through.

The main beam replacement one in mine is RED...what colour would I need to add to give a blue effect?

TR

Hello, I need a blue bulb for my dash main beam warning lamp. Are they a special type ?

I have looked in the wiki but nothing there. Thanks.

Tex Ritter

kevtherev wrote:this ones on the wiki

Thanks for that 'kevtherev' have printed that out.

Tex Ritter

Blimey! not having the best of luck are you?

Hope you get your family?, yourself, and your van home OK.

TR

The procedure is in the wiki