Club 80-90 Forums

Propex heater is now all sorted it was the PCB. I now have heating thanks all 
Will

PS you gave me the confidence to to take it out myself 

I have now taken the PCB out and there is a rattle in it so I think something has come loose in side. Packed it up and have now sent it to Porpex for testing here;s hoping. Mine is the HS2000 thank you so much for your help
 

Would you mind explaining how you remove the PCB do you have to remove the whole heater to do this ?

I will have a look to see if I can find a fuse, and re-do the wires. But the pic is how it was originally wired up, the reason that I rewired was because of a crushed wire and a damaged wire that had no insulation on it exposed in the back it was the white wire that went into the LED connection whic...

also reinstated old thermostat with no differences.
 

---

Yes I did take pictures and the wiring is correct according to the instructions 

even put the old one back still no luck
 

all I did was trim the thermostat wires that lead into the thermostat because one was frayed that's it. checked the cable to the main heater all ok check the power supply to it all ok even put the thermo back still no power at the stat again what I don't understand is that it was working fine when w...

Problem is its not even flashing it was working ok but with a the yellow light flickering so I decided to renew the thermostat now I have no power to the stat but power to the heater unit  before I replaced the stat it was running with the cold fan but when put on gas it would spin up but would not ...

Hi all I was just wondering if anyone could help with a problem I am having with a Propex HS2000. We had a day away last week and when out used the heater all working well. But since we have been home the heater will not work the yellow light was flickering all the time but would still work so I had...