Club 80-90 Forums

Just need a mechanic to get me over the line with my resto. 84 twin slider 1.9 DG. New clutch fitted can’t disengage when I depress the pedal. Tried adjusting the operating rod into the master cylinder ( yes I got my big hands up there) but I’m still not getting into gear... If anyone knows someone ...

https://share.icloud.com/photos/0R2B1My ... jNN7JtjP1Q

Thanks for looking @davidoft1

Hello all, I’m restoring an 84 twin slider . The Vin states it was built as a camper , there is a full bulkhead, no back windows and no rear seat belt fixings. This confuses me as I’ve read campers should have rear seat belt fixings. I bought 2x Sliding Door Seal 80->. Fits Left or Right. 252-843-79...

Sorry I’ve asked this question before didn’t get an answer - All the bushings are now replaced and steering assembled( van is still off the ground on chocks) Just looking at my front suspension assembly and replacing bushings. I have the old style wishbone with the insert to fit the stabiliser link ...

Thank you Stuart .. just what I needed

Morning, when I mean left to right I mean in and out of the van... there is a slight gap between the wishbone and the chassis. The van is in the air at the moment I’ll try and send a pic.

Ive replaced my bushes ( spot welded) and refit . The van is off the ground on chocks. Upon reassembly there is excessive play from left to right . The rod is in the correct position with the flat face vertical on the rod. The washers are lobe down as per Bentley. Is this right? Will it change once ...

multisi wrote:Is the radius rod ,the bolt onto the track control arm type or does it screw in.

It bolts on...

It bolts on...

Just looking at my front suspension assembly and replacing bushings. I have the old style wishbone with the insert to fit the stabiliser link into. My links are the later straight items and not cranked. I’ve read they are not compatible but mine fit and work ... Question do I replace my straight lin...

Any recommendations on a decent spray shop near Brentford West London? My van is stripped primed and rubbed down just need decent two tone top coat?
Please let me know

Sam

Can anyone recommend the most suitable full brake system replacement for a 83?

just Kampers have this kit -Copper Nickel Brakepipe Set for Righthand Drive VW T25 1982–1992 Dual Circuit £160.

Before I buy any other suggestions that may be cheaper or better?

Cheers

Sam

Aidan wrote:Andy at Syncrosport.com

Cheers Aidan

I’m undertaking a full resto on a twin slider 83..
I’m considering a full wiring replacement loom ... I’ve no idea if the original is any good.

Any ideas suggestions . Any recommendations on a decent electrical loom provider?.. prices quality etc

Cheers

Sam

Cheers!