Search found 9356 matches
- 17 Nov 2021, 20:10
- Forum: T25 Alternative Engine Forum
- Topic: Early DG conversion to 2.1 DJ spec
- Replies: 12
- Views: 4255
Re: Early DG conversion to 2.1 DJ spec
I think if it were me I'd just fit a T piece to the low pressure switch hole if you need a buzzer switch. Oil pressure should be 2bar at 80decC 2000 rpm at the low pressure switch but if it falls below 0.9 bar at 2000rpm ( grey switch) really hot at 110+deg C oil then I think you have problems anywa...
- 17 Nov 2021, 19:54
- Forum: T25 Alternative Engine Forum
- Topic: Early DG conversion to 2.1 DJ spec
- Replies: 12
- Views: 4255
Re: Early DG conversion to 2.1 DJ spec
Yes early case. Sorry I can't see how you can guarantee no swarf in gallery so i''d say only on a rebuild.
- 17 Nov 2021, 15:21
- Forum: T25 Alternative Engine Forum
- Topic: Early DG conversion to 2.1 DJ spec
- Replies: 12
- Views: 4255
Re: Early DG conversion to 2.1 DJ spec
How difficult or easy is it to add the second oil switch below water pump on an early DG1900 block? Is it really just drilling an appropriate size hole through the case then adding a thread using correct size tap to suit the oil switch thread? Yes possible, 123-jn did it on this early case he made ...
- 14 Sep 2021, 16:30
- Forum: Mechanical
- Topic: itchylinks
- Replies: 2
- Views: 922
Re: itchylinks
VW T3 T25 useful links You can add pics here and copy BB code link then paste in you post on most forums https://www.techpowerup.org/upload Dummies guide to uploading pics here https://club8090.co.uk/forum/viewtopic.php?f=37&t=168842 -------------------------------------------------------...
- 14 Sep 2021, 16:29
- Forum: Mechanical
- Topic: itchylinks
- Replies: 2
- Views: 922
itchylinks
All the links are broken after moving to https.
I have updated them all here https://itchyfeetuk.wordpress.com/itchylinks/
Also pasted below if somebody want to update the locked and pinned thread.
I have updated them all here https://itchyfeetuk.wordpress.com/itchylinks/
Also pasted below if somebody want to update the locked and pinned thread.
- 27 Jun 2021, 19:06
- Forum: Mechanical
- Topic: Speedo cable replacement
- Replies: 42
- Views: 23140
- 27 Jun 2021, 19:05
- Forum: Bodywork, Seats & Glass
- Topic: Holdsworth villa 3 pop top gas struts
- Replies: 28
- Views: 10452
Re: Holdsworth villa 3 pop top gas struts
Facebook recommendation https://www.proudtopop.co.uk/
- 01 Nov 2020, 18:08
- Forum: Electrical & Instrumentation
- Topic: Digijet manual
- Replies: 4
- Views: 1311
- 15 Sep 2020, 16:35
- Forum: Mechanical
- Topic: Replacing fuel (petrol) hose from injector rail to injector
- Replies: 19
- Views: 4311
- 12 Sep 2020, 08:55
- Forum: Mechanical
- Topic: Replacing fuel (petrol) hose from injector rail to injector
- Replies: 19
- Views: 4311
- 12 Sep 2020, 08:40
- Forum: Mechanical
- Topic: Replacing fuel (petrol) hose from injector rail to injector
- Replies: 19
- Views: 4311
Re: Replacing fuel (petrol) hose from injector rail to injector
Nobody knows how Bosch fitted the hose they may have used some process to bond it but general common sense says fit a hose clip. I can't believe you are bothering arguing about it. Don't fit one if you don't want to but please don't promote such bad practice as others may copy you. you may not find ...
- 11 Sep 2020, 15:13
- Forum: Mechanical
- Topic: Replacing fuel (petrol) hose from injector rail to injector
- Replies: 19
- Views: 4311
Re: Replacing fuel (petrol) hose from injector rail to injector
I think you would be mad not to fit a fuel clip. I'd take those bits of metal off or the clip won't fit well.
- 10 Sep 2020, 16:28
- Forum: Mechanical
- Topic: Replacing fuel (petrol) hose from injector rail to injector
- Replies: 19
- Views: 4311
Re: Replacing fuel (petrol) hose from injector rail to injector
you may need to cut the hose as spigot is barbed , just be careful not to score the spigot too much it's aluminium so cut gently repeatedly so you cut just a bit at a time.
- 10 Sep 2020, 15:40
- Forum: Mechanical
- Topic: Replacing fuel (petrol) hose from injector rail to injector
- Replies: 19
- Views: 4311
Re: Replacing fuel (petrol) hose from injector rail to injector
cut the metal ring off with wire cutters and the pipe pulls off. then use standard fuel pipe clips. it's just a barbed spigot underneath.
- 08 Sep 2020, 15:00
- Forum: Mechanical
- Topic: Did Vw Line bore there own stamped DJ rebuilds?
- Replies: 29
- Views: 4773
Re: Did Vw Line bore there own stamped DJ rebuilds?
What is the gauge and sender. electric gauges can be inaccurate. better to fit a wet gauge and repeat.
Does sound like it needs a rebuild.
Does sound like it needs a rebuild.