Club 80-90 Forums

I have now had success after 47 Posts and highlight my final actions as follows:- 1. I removed the flue pipe lagged area to check there was good contact between flue pipe and ammonia gas pipe. https://i.imgur.com/782Lh9s.jpg The gas brass jet/nozzle was soaked in carburetor cleaner and finally blown...

Hi Max, a very kind offer, however, I live in Gibraltar! I traveled in UK this summer but returned to Gibraltar in September
Kind regards
Bill

Firstly, thanks to all responders for your thoughts and practical suggestions on how to resolve my fridge problem. I have yet again removed the fridge, it’s burner unit and double checked the brass jet orifice ( I boiled it for a while to dislodge any possible obstruction!) and when viewed in darkne...

Hi guys, Porkscratchings asked my location, well, I’m now in Gibraltar. Earlier in the posts it mentions ‘quality of gas’, the last filling I did was in Hereford UK, however I usually fill in France, Spain or Portugal ! Maybe there is a ‘quality issue’, but I’m doubtful because the hob burners work ...

Hi RogerT, thanks for the photos which shows the baffle very well, BUT your fridge is a different model, hence the loose baffle. I agree, the flue on my RM184does get very hot at the top Tee, thats why i thought I could introduce some sort of additional baffle to concentrate the flame heat lower dow...

Photos of fridge flue modified to gain access and cleaning same.

Photo of flue lower end with burner unit detached. The first/fixed baffle constriction can just be seen

Thanks again for inputs guys. As previously stated, I did run on mains 220v with Temp Knob rotated clockwise to Max and got ice on the fridge fins etc, So, im doubting the thermostat or gas cycle to be a problem ! Its difficult to see or hear a flame change when adjusting the temperature knob, howev...

Still a mystery ? I have removed the fridge, removed the gas jet which is clean and clear as is the burner tube. The flue pipe is the same configuration as described by Max, i.e. there is no loose adjustable baffle, only a few internal protruding/fixed constrictions at the lower end of the flue pipe...

Hi guys, regarding flue cleaning with a wire rod. Oldie but Goldie says there is a portable flue baffle fitted within the flue pipe as in the diagram above. My question is; when cleaning the flue did you remove the baffle ? How was it fitted and in what position? If the spiral baffle remained in pla...

Thanks to you all for very constructive responses :
Just need to get on with the job, well, not today

Hi Porkscratchings, well, thats another interesting possibility and I will do a careful check once I get the fridge out. Thanks for those thoughts ! I recently had the fridge out and upside down thinking the ammonia gas mixture or sediment needed a shake up/re mixing as per a previous post. I noted ...

OK thanks, need to get the fridge out and inspect flue

Watch this space

Thats very interesting and helpful, thank you ! But i note that my fridge Model No RM 184 is not listed, so, Im not sure whether a baffle is fitted or not !?! Maybe best to remove the fridge again and open up the flue pipe and inspect the internals ? A baffle as shown in your diagram could not 'fall...

I attach a photo of the fridge ( upside down) and the heat exchanger is on the left with exhaust pipe pointing down. Where is the baffle? What does it look like? It’s not obvious so I don’t know what to check? Ie is it in position, the right position? Any diagram or photo of a ‘baffle’ would help pl...

Thanks Mocki there is a blue flame and the outside vent does get warm, so i assume its working on gas and the flu should be clear. I had the fridge out a few weeks ago, cleaned fins, removed and checked the jet clear. One other, but unrelated issue I had was the gas would not light. I had fitted a n...