Club 80-90 Forums

If you use an auto engine you'll have to remove the torque converter, off it and replace it with the flywheel from your dead engine, you will need to check the crankshaft end float after doing this.

Sent from my SM-T580 using Tapatalk

avoid the tresspass ones from Argos the stiching is not up to the job..

Sent from my SM-T580 using Tapatalk

A couple of links to articles from USA sites I presume they are wired up the same. https://www.google.co.uk/url?sa=t&source=web&rct=j&url=https://www.vanagain.com/troubleshoot-your-radiator-fan/&ved=0ahUKEwiC1KLDj43UAhVGLMAKHfdZAS4QFgggMAA&usg=AFQjCNEmhDWPH5uwZCz6-NnlgM6ZP-u7CA&a...

Finished off fitting my 2.3m Fiamma Caravanstore that I got for free from my sister. Bought a set of Fiamma F45 T25 gutter brackets, 2.4m ally box section with end caps and a three part 3.6m awning rail extrusion of which I used the two 1.2m end sections. So has probably cost me £100 https://uploads...

I used the puriclean in mine and drained and refilled it a couple of times, after driving it full up though it has stirred up some particulates so I think I will replace or fit a new inline filter. Though it should be safe.

Sent from my SM-J510FN using Tapatalk

I emailed propex early this morning and got a reply back from Propex first thing and now have it working. Top service

Sent from my SM-T580 using Tapatalk

Wiring instructions

Sent from my SM-T580 using Tapatalk

Manual

Sent from my SM-T580 using Tapatalk

Inside stat

Sent from my SM-T580 using Tapatalk

I can only get my propex working by bypasing the thermostatic controller. I only have four wires at the thermostatic controller power from batt (pos/neg) and power to heater (pos/neg). The thermostatic controller has four terminals, there is a wiring diagram inside the cover (Forgot to take pic) for...

I got mine from Mike a trader on here is username is Plasticman, I told him what conversion I had and how many windows and he prices it up for me and knew what I needed didn't have to measure anything..

Sent from my SM-T580 using Tapatalk

I got a brushed stainless steel one from Vanwurks they do them for two floor thickness/heights with or without lighting:

http://www.vanwurks.co.uk/sliding-door-trims" onclick="window.open(this.href);return false;

Sent from my SM-T580 using Tapatalk

Jeff J wrote:So how do we know what type of fuel we are filling up with when we get to the pumps?

The pump has to be clearly marked if it dispensing E10 I keep looking on the pumps but haven't come across any marked up yet

Sent from my SM-T580 using Tapatalk

Try asking Metalmickey on this site. He has supplied them to me in the past and knows the best ones to buy. Didn't he change his nick to Plasticman or something? He sorted out my rubber seals for me, just checked my messages from him and his forum name has indeed changed to Plasticman. Sent from my...

Diesel bug is very real been a problem in the leisure Marine industry for years. It grows at the interface between the water and diesel in the tank where there is oxygen present. When the bug (micro organisms) die they form a slime or jelly like substance which is what blocks fuel fittings & fil...