Club 80-90 Forums

So my bus will fire up with no problem and it will idle but the idle is not smooth it will idle for a couple of seconds and then surges it’s up and down all the time I have played with the idle screw the mixture screw and nothing seems to happen when you pick up the revs it’s fine so don’t think it’...

Does anyone know what the standard ride height is a for a tin top bus measurement from floor to bottom of wheel arch ?

Will a sliding door from a 82 bus fit a 86 bus are there any differences ?

Can not for the life of me think where this panel goes the description on AH Schofield is a little confusing can anyone shed a bit of light on it or even a picture ??

Ok my bus has been lowered around 60-70 mm and it’s sitting on banded steels but the passenger side rear wheel looks to have a lot more camber than the drivers side,what could cause this ? When the I fitted the lowering springs the mount had corroded so I fabricated a new mount I used the other side...

Ok thankyou the breather system has a lot of pipes so will dart them thankyou

Filler neck looks ok no splits but will have a closer inspection
Cheers

Ok twice we have been camping and on the trip home the rain starts the bus getting sluggish pops farts and cuts out she will start agian but will die as there's no throttle response,also on both occasions we had fueled up a couple of miles back. The right fuel went in but filter looks a little dirty...

Ok looking at some new shoes for my bus they are 17" but they are 8j my bus has been lowered around 60mm
Will 8j fit under the arches and if so what size tyres would be best ??

Arrr the T25 way nice and slow
Thankyou for your help

It was a minibus but I haven't got the time to put belts in the back before the wedding

I have a 1986 T25 and I have been asked to use it as a wedding car it is fitted with a full width R&R bed and no belts,do I have to have belts fitted to take passengers
Any help would be apriciated

Have ordered from brickwerks now cheers guys

Looking for the best place to get screen seal from I have been told that VW heritage seals are a pain to fit and can crack the screen so don't want to go with them anyone have experience or good ideas ?

Any advise which is the best to get and where to get it from