Club 80-90 Forums

yes there is fuel in float chambers and these are not flooding .

Is that the fuel Ines onto the carbs and the filter on the carbs

hi guys i have just replaced my 1.6 ct engine with a 1.8 air cooled and fitted h40 carbs on it i have checked the timeing and all electric replaced gaskets with new ones but it still wont start there is fuel going to the carbs and when i pour fuel straight into carbs the engine starts and runs until...

hi guys got the engine running and sounds sweet and here comes the but it has one of those nikke twin carb jobs on it douse any body have any informaction on the tuneing and setting of these carbs

yes the engine was running when t was in the other vechile and it was running good but by the time i got it some one had claimed the coil and some leeds and i think it had been sitting in my mates barn for a couple of years but turns and ticks over , i did the old vacum test on the dizzy and can her...

and just before i forget if you leave the ignaction on it gets realy hot the coil that is .

am gonna try and put another coil on just to see if there is any diffarances and strip the carb and give it a good clean i was realy just wondering if a over heating coil is a sighn that its knackered as i have a bay aswell and the coil on that only gets warm .

i have cleaned out the jets in the carb well i think i have never seen one before but cleaned it as best as i can, as for points and coil its just your everyday set of points and a coil i had lying around just need to know if its getting hot because its knackered as for accelarator pump on carb dont...

Right guy this is for all you gurus out there just put a 1.8 engine in my t25 as it had the 1600ct as that died a death this 1.8 according to engine number is from a 914, yep check everthing and it fits perfect only down point it came with a Nikki twin carb but thats no the problem am ok at working ...

Hi guys looking for a diagram of the hot air system on this t25 1.6 air cooled as i suspect it aint all there especially the part that connects the heat exchangers to the middle hose that runs the full lenth of the van underneath .

hi mate yes got the manual and decided to go the clutch cable route have managed to get hold of a set of peddals as the cable and every thing is there so why change it if it aint broken .

yes mate your right looks like the guy that had it before me was in the proccess of changing it to hydrolic clutch but only got as far as changing the pedals how hard is it to change or woud it be easyer to change it back to cable operated and where would be the best place to get parts as i dont kno...

it douse have a servo mate its monted under the dash am trying to get hold of a manual hopefully help me better.

Hi guys am new to the sight as i have just purchesed a Devon T25 1.6 air cooled it aint complete but its not a shed things wrong needs speedo and some switches but thats not why am putting this post out any body know anything about the clutch cable where it attaches to on the peddle and the hose for...