Club 80-90 Forums

Thanks for all the help guys 👍 I managed to get my lights working. There was a wire come off and dropped down at the back of the headlight switch a yellow with black stripe. Also I needed to place the wires in the order to match the Go Westy wires which I hadn’t done. Thanks again I can see the road...

It must be getting late. Yes I fitted LED lights into stock fittings

Yes that’s the earth point on mine. The LED lights where an upgrade from CVC. For some reason I have to hold the stick back for them to stay on. They don’t click and hold on the on position. I think the side lights are also connected with the main lights but I can’t remember. They may be on the main...

Thanks for the pics I’ve checked it’s the same as I did for the early one.
Cheers

Hey Any suggestions are welcome. I’ve got LED lights and they work fine as they flash when you pull back on the stick on the steering wheel. This is what’s confusing me. It’s like there is a lack of power to the headlight switch and lights on dash etc I can only see one earth nest near the fuse box ...

Hi Thanks for your reply. I’ve got a 2L Aircooled 1983 It’s been running fine I use it every day but the lights have probably not been used due to Summer. The wiring is following instructions from GoWesty for the white plug behind the dash. The earth wires look fine behind fuse box. Is there another...

Hi Everyone, Any help on this would be greatly appreciated. I have just upgraded the dash lights with a Go Westy GVW-255-919-059-ANCLOCK pack. I didn’t know about the cheaper option. Never mind. Before I fitted the pack there where no dipped headlights only flash on the stick working and all the das...

Thanks 007 it looks simple enough I just have to try and find the correct wires at the fuse box . Thanks for your reply .

Hi All

Please can someone help me with my install of a VDO 5 Bar Oil Pressure gauge?
I have connected a new wire from the twin sender G and WK. Just need help connecting the rest up properly.
Any help would be great thanks.

Simon

Hi NomadAd

I use a CTEK they are great and charge a flat battery in about 10 hours.
Just pick the one which suits your needs. Mine is the MXS 5.0 Test Charge.
Hope this helps.

Hi, I pulled the lock out as I couldn't see anything down the vertical slot. I put the handles back on and figured out what was wrong after figuring how the lock mechanism worked. There was a metal plug which had snapped off. The inside handle relied upon the metal plug to push against so that the d...

That's great I'll give it a go with a screwdriver tomorrow. Thanks also for the advice on buying a new lock.
Thanks
Simon

I have pulled the panel off and it is all connected. There is the usual lock on the inside but no obvious child lock. That's why I thought it might be in the slot at the edge of the door.

Hi All,
Thanks for your replies I think the child lock is a possibility. I opened the door and looked at the edge of the door were the lock part is and there is a vertical slot but no lever to move?
Is this were the child lock is ? Do you stick a screwdriver in it ?
Thanks
Simon

Hi
Does anyone know why the handle on the inside of my 1982 Devon won't open the door despite the outside handle working fine?
Any help welcome

Thanks

Simon