Club 80-90 Forums

The white one is just a coat hanger as I was trying to make a template for the engineer to try and replicate without seeing the actual engine. its was almost there, but clearly my part of the work wasn't as good as his

i have add a couple of shots. i used the pump id plate to identify it. you can see in the shot of pipes that only two come this same side as the bit sticking out of the pump. sorry, my tech knowledge is limited...

I should also add, when the engine was converted, from 1.6 to 1.9, as they used the old pump they must have redesigned the injection pipes as they didn't follow the usual path and it was only possible to 'Clip' two of them together. cyclinder 4 goes one way round the round thing (actuator i think) o...

Thank you for the responses both. The pipe sheared off as I was driving and i knew it happened as you loose literally all power. the garage I use, who specialise in VWs and have been working with them for years felt that as the injectors and pump are working already, its a more expensive route to go...

I have managed to shear off another (3rd one) injection pipe, from pump to injector, and through many calls and some research, have found that my t25, when coverted to a AAZ 1.9, they kept the 1.6 JX pump. I cannot buy off the shelf pipes so I am going to try and get some flexible ones made, but to ...

Hi, I have just had another 1.9td AAZ engine installed in my t25 after the last one cooked due to all the water leaking from the system. when the engine was changed, all the ancillaries had to be removed from the old engine and put on to the replacement engine. They also advised that new glow plugs ...

thank you for the posts.

didn't have much luck with my last one so on the hunt for a all rounder. thanks for any help or advice you can give.

hi, a few issues that have come to light. i have an 82 water cooled, 1.9 TD [conversion] T25 [canadian/US import] Today, my heater was working until i stopped for about 10 minutes. there was a minor burning smell but assumed this was due to not being used for a few months. is there anything i can do...