Club 80-90 Forums

I have taken advice and watched various tutorials on mig welding. Have bought some sheet metal and cut various shapes and have been plug , stitch welding.(in my shed).. not got confidence on a vehicle yet. I’ve been playing around with settings, high/low/ speed of wire and gas. And I’m slowly gainin...

Thanks Daisy have added to my Home Screen
Neil

Thanks Jackrobbo I’ll check out plug welding.

Yes Davidoft1 i was referring to the tip with the 2 lugs on... thanks

Neil

Hello , have recently got a Clarke mig welder and
want to have a go at spot welding.
I’ve seen that you can get a spot welding adapter to fit on the tip, is this the best way to learn as I’m a novice.

Thanks Neil

Hello Ian

I’m going to keep for back up / spares

Good luck
Neil

Hello Ian The dimensions are as above , just dug it out from back of shed. Can’t find bottom grill , been sitting number of years but as stated I wired up and it worked electric, gas would have to be checked by professional. A little tatty on top but that can be sorted and it’s hidden away any way. ...

They’re super tight , lubricated mine snapped my bar... had to borrow 3/4 3 foot knuckle bar and stand on it... eventually came off.

Good write up in wiki section brake backplate
Good luck

Good luck

Spare definitely works on 12v and mains
90 % sure it worked on gas £30.

Thanks Neil

Morning all I’m based in Brighton and I have a Electrolux RM122 (also have a spare) ... if you want to pop up and compare to see if yours the same as mine. Then at least you’ll know what you have. As Mocki said there is a good download on here for the Electrolux fridge . Sorry can’t help on the fitt...

Hi Dave ... thanks once again for the link same colour as mine.

Thanks Neil

Hi ... thanks for posting company regarding
T Trim ...where did you get the vinyl for the
cupboards, as I have a Karisma and I’m refreshing mine as well.

Thanks Neil

Thanks for replies Plasticman and 100leelee
have sent you a pm Plasticman

Hello I noticed rust trails weeping down centre panel, I took roller cover guide off and noticed rust hole between cover u guide where rubber sits and roller guide..I started scraping and grinding and now I have a hold 5 inches long by 2 wide. A) is the roller guide plate spot welded to centre panel...