Search found 5 matches

by lenny84
18 Jul 2014, 10:59
Forum: Electrical & Instrumentation
Topic: 1984 T25 Dash lights problem
Replies: 7
Views: 3260

Re: 1984 T25 Dash lights problem

So had a continuity test of my random wires at the connector plug (with power off).
Pink wire; getting reading at all of the pins exempt for numbers 2,3,5 and 12.
Lighter of the two brown wires; only get reading at pin 5.
Other brown wire; only get reading at pin 2.
by lenny84
18 Jul 2014, 10:37
Forum: Electrical & Instrumentation
Topic: 1984 T25 Dash lights problem
Replies: 7
Views: 3260

Re: 1984 T25 Dash lights problem

Right got a little further with this. -Removed earth crowns and cleaned up, also fitted new spade connectors to earth wires -New headlight switch fitted Just tested my voltage regulator, with headlight switch 'off', I'm getting 12v in and 10v out. With headlight switch 'on', either sidelight or dipp...
by lenny84
14 Jul 2014, 10:19
Forum: Electrical & Instrumentation
Topic: 1984 T25 Dash lights problem
Replies: 7
Views: 3260

Re: 1984 T25 Dash lights problem

Thanks for the help.

Diode is good, just tested.
Which one is the load relay?

Maybe worth noting that all my other dash electrics function normally - indicators, hazards, headlights etc.
by lenny84
14 Jul 2014, 09:31
Forum: Campers
Topic: Fridge flue query
Replies: 1
Views: 785

Fridge flue query

Firstly hope this is the right section. The fridge is a RM122 (12V / gas). Camper is 1984 T25 Caravelle. Currently doing the build to have the fridge located in units that run across the front, behind the cab. The fridge was previously fitted in the usual place in unit under window opposite to slidi...
by lenny84
12 Jul 2014, 20:46
Forum: Electrical & Instrumentation
Topic: 1984 T25 Dash lights problem
Replies: 7
Views: 3260

1984 T25 Dash lights problem

Problem is with dash lights, they work as they should when headlight switch is pressed, but only up until the ignition is selected, and thereafter when engine is running they are not illuminated. All other dash lights and switches etc function correctly. So far had dash out and checked connections a...