Club 80-90 Forums

Halfords high temp spray not too bad rev... But yeah I have to go over mine regular.
I'm sure there are more heavy duty options available though. You got nothing specialist at work ?

Yes its the B2L
I think you may be right with the decoking !
No idea when it was last serviced.
I took off the 2 inlet\outlet pipes and they were clear ... Can feel the exhaust pushing air out also.

Will check out the manual

Thanks for reply

My ebber has been intermittent for a while. The heater/motor runs fine, the fuel pump works fine (clicking away and can smell the fuel... So I'm fairly sure it is getting through) but it won't kick in and ignite. ( very occasionally) It does run and stop itself and I retried the cycle after 3mins et...

If your lights work you have 12v.... So its not the fuse! The fridge on gas....the light flickers till its ignited....make sure the gas valve is on...select gas button and keep the ignition button pressed in till the light stops flickering....you can usually hear a faint pop when it kicks in. The 12...

Hi there... Have you got 12v ...do your various inside lights work etc...or just dim? Sounds like your 12v fuse may have popped? The water....if your pump definitely running ..dont want to state the obvious...have you got water in the tank? Your 240v socket will only work when on mains hook up. Your...

max and caddy wrote:

ninja.turtle007 wrote:What happens when the housing causes an MOT failure? Can the housings be lined?

You ask for an appeal form...

Where is the like button..

if i leave my van for more than 4-5 days i sometimes get the noisy tappet as the oil has drained out as Kev mentioned. The noise is more of a "clack clack clack" than a rattle though. Did the owner explain what the noise was? If you view the van again, check if the engine is warm.. he may ...

Thanks kev ...much appreciated
I've had look on ebay to see how much they are fetching, but not many on there!
I don't know if that's a good thing or not!!

They are deffo C x 1560 ....as stamped on the alloy mounting face.

Your absolutely right Steve, no sentimental value at all! Think I will stick with the steels for now. However, you mentioned my current tyres are too small ....what do you recommend? Kev, great pic... That's exactly what they are I reckon! Thanks for the info/feedback lads.... Thats what the forum i...

thanks all for the feedback.

i will try the alloy on the van this weekend, that will at least confirm if the PCD is correct and if the hub centre is big enough!
however, to determine if the alloys are strong enough for the van....not really sure how to confirm that!!

some pics of the alloys.... http://i1358.photobucket.com/albums/q775/hally75/wendyphonejan2014081_zps8c2d6e44.jpg" onclick="window.open(this.href);return false; http://i1358.photobucket.com/albums/q775/hally75/wendyphonejan2014080_zpsc22236c9.jpg" onclick="window.open(this.href);...

Hi Steve thanks for your advice. unfortunately no other part numbes on the alloys. i'll find out more some info on the ET and the PCD and get some photo's. i see your in Barnsley, are metalmagic any good for refurbs? (i'm in Chapeltown, Sheffield) like you say though, this is all IF they are strong ...

Hi all I am considering putting some alloys on the van. (westy joker pop top) They were bought with the van but supplied separate without tyres and in need of refurb etc. My van is currently on standard 14" steels (with 185 x75 x14 tyres) so i am concerned about the difference in wheel size and...