Search found 107 matches
- 12 Sep 2023, 19:25
- Forum: Electrical & Instrumentation
- Topic: Temp gauge
- Replies: 57
- Views: 27249
Re: Temp gauge
There is no way I could have bolted down the circuit board to flatten the contacts they were made wrong from the start have you tried to squash solder between two bits of plastic
- 06 Sep 2023, 16:39
- Forum: Electrical & Instrumentation
- Topic: Temp gauge
- Replies: 57
- Views: 27249
Re: Temp gauge
Today I received this from SHC it came with a new lead and a set of nylon washers no mention about my fxxxxd gauge
- 05 Sep 2023, 19:38
- Forum: Electrical & Instrumentation
- Topic: Temp gauge
- Replies: 57
- Views: 27249
Re: Temp gauge
I have been in touch with shc they have offered free of charge a set of nylon washers to isolate the circuit board I have already told them that no amount of nylon washers would cure the faulty circuit board it also will not help the fact that my temp gauge is now fxxxxd
- 25 Aug 2023, 14:21
- Forum: Electrical & Instrumentation
- Topic: Temp gauge
- Replies: 57
- Views: 27249
Re: Temp gauge
Received the dash today fitted this afternoon all working as it should (yes I did swop the temp gauge) taking it for a run tomorrow thanks again Angelo onwards and upwards
- 22 Aug 2023, 13:59
- Forum: Electrical & Instrumentation
- Topic: Temp gauge
- Replies: 57
- Views: 27249
Re: Temp gauge
Well I am hoping to day is a better day put in an old dash set that has some damage but temp and petrol gauges working so I think that means my wiring is ok so I will take up your offer and post my dash .my next planned trip is to Busfest but if I have to can manage with just the two gauges never go...
- 21 Aug 2023, 12:14
- Forum: Electrical & Instrumentation
- Topic: Temp gauge
- Replies: 57
- Views: 27249
Re: Temp gauge
Angelo hope you have patience and your thinking head on pulling 43 made no difference Connected a wire from the yel/red to14 wire plug I have continuity Connected a wire from brown to plug I have continuity with brown term 3but also with 1-2-3. 5. 8-9. 13 Term 6 is yel/red Now the best bit put all b...
- 19 Aug 2023, 09:04
- Forum: Electrical & Instrumentation
- Topic: Temp gauge
- Replies: 57
- Views: 27249
Re: Temp gauge
With plug disconnected gauge straight to hot and light flashes
Disconnected this is my reading and I have continuity
Disconnected this is my reading and I have continuity
- 13 Aug 2023, 18:08
- Forum: Electrical & Instrumentation
- Topic: Temp gauge
- Replies: 57
- Views: 27249
Re: Temp gauge
Soon as I turn on ignition
- 13 Aug 2023, 18:04
- Forum: Electrical & Instrumentation
- Topic: Alternative temp gauge
- Replies: 3
- Views: 388
Re: Alternative temp gauge
Thanks for the reply it’s 2.1 dj running on a carb all with 1.9 dg wires from 1986 it also has lpg conversion
- 13 Aug 2023, 17:59
- Forum: Electrical & Instrumentation
- Topic: Temp gauge
- Replies: 57
- Views: 27249
Re: Temp gauge
As soon as I turn on the i
- 12 Aug 2023, 17:04
- Forum: Mechanical
- Topic: Anyone used their OEM jack successfully?
- Replies: 31
- Views: 2598
Re: Anyone used their OEM jack successfully?
This is what you get with the gipsy
- 12 Aug 2023, 15:19
- Forum: Electrical & Instrumentation
- Topic: Alternative temp gauge
- Replies: 3
- Views: 388
Alternative temp gauge
Which is the best hose to cut to put in a sensor point still having trouble with original gauge so need some way of watching the temp until it’s sorted. Thanks
- 12 Aug 2023, 15:03
- Forum: Electrical & Instrumentation
- Topic: Temp gauge
- Replies: 57
- Views: 27249
Re: Temp gauge
Also should note although it is 2.1dj wires are all as before when it was 1.9dg also still on carb so other sensor is the carb heater
- 12 Aug 2023, 15:00
- Forum: Electrical & Instrumentation
- Topic: Temp gauge
- Replies: 57
- Views: 27249
Re: Temp gauge
Been under the van one red/yellow other brown on sensor to front
- 12 Aug 2023, 12:27
- Forum: Electrical & Instrumentation
- Topic: Temp gauge
- Replies: 57
- Views: 27249
Re: Temp gauge
Today went back to basics put everything back together removed the earth crowns cleaned again clean and checked terminals removed crowns and cleaned back to bare metal applied Vaseline switched on ignition still light flashing and gauge to hot