Club 80-90 Forums

Checked out the problem some more today and it appears the cold start mechansim has not been fitted when the AAZ was fitted. The drop off is now smooth following some lubrication. However. there still remains the problem when I start the motor it ticks over ok at 850RPM and then rises to 1400RPM whe...

Thanks for the tip, I have a manual and will take a look
DD

Hi All I am having problem with the tick over with the AAZ and wondered if anyone had any ideas where to start???????? The engines starts first time every time, and when cool ticks over @ approx. 850RPM, when the engine then gets warmer the tick over RPM becomes erratic and can be anything between 1...

Hi All now fitted and the olive has been set, fitted the nylon gear lever rabbits ears and the onion replacement from Brickwerks and all looking good, its nice and tight. I tried it first thing this morning and it was a little hit and miss on gear selection and felt lumpy so i need to go on to the n...

Hi Dave F Unfortunately DF I did not carryout the reconstructive surgery but I am reliably informed it was TIG welded and ground. My Surgeon tells me it was mild steel so it should be straight forward. However in trying to be the ultimate professional he has covered all blemishes scar and dimples So...

Does any one have a gear stick RHD 4 Speed from which they can give me the measurement to where the olive should be affixed onto the shaft.
Thanks
DD

Thanks

Thanks, I will order some ears and take it from there. However, the bit that is confusing me is the reverse gate in the gear lever housing, I may just be missing something but it seems on the wrong side. My thinking is as follows, it to be on the LHS when you look at it from the front underneath or ...

Tried to post some pic hope it works

http://s1305.photobucket.com/user/davet ... sort=3&o=0

Hi I had read up on the replacement of the Gear Linkage Bushes and followed several threads on the subject. I subsequently got the parts from Brickwerks and pencilled in in for the first good weekend when I can get underneath and carry out the replacement in an effort to tighten up my box. but my ha...

Hi I had read up on the replacment of the Gear Linkage Bushes and followed severl threads on the subject. I subsequently got the parts from Brickwerks and pencilled in in for the first good weekend when i can get underneath and carry out the replacement in an effort to tighten up my box. but my hand...

Gary I will try and document something when i have sorted out the final solution. But at the moment it is ongoing. It is not an original vw clock The clock is from China of all places, but it came within 2 weeks and works ok. http://www.ebay.co.uk/itm/330774904780?ssPageName=STRK:MEWNX:IT&_trksi...

Hi
Many many thanks ZsZ for the info it is more than I could ask for.
I will now be able to make some progress.

It very much looks like I have a broken track.

DD

Hi I have now fitted a new digital clock to the existing aperture on the instrument cluster, however when i went and restored the instrument cluster in to the dash and power it up I am not getting any voltage at the plug socket where the existing digital clock plugged into the instrument cluster PCB...

Sorry but have not got round to this yet as I have a leaky sunroof I have to sort out first