Club 80-90 Forums

Possibly the white connector behind fuel gauge has come loose, top pod pops off to get access. Or maybe ground connections behind fuse box. Worth a check anyway to rule out.

Firstly apologies if it's the wrong forum. Just wondered, at the moment I have 3 keys for me van. Well 4 inc filler cap. Bit is there any way of getting one cut to fit all locks or do I have to replace barrels etc?

Hello, been reading the wiki and forums have a DG 1.9 looking to drain the old oil so looking for replacement, got the socket on order just need the oil Have found these, they seem to fit what people say, can anyone confirm it's right. http://www.ebay.co.uk/itm/271549625343" onclick="windo...

Oh it was keyed all right. The petrol just are through it

Had this problem myself today. Until I realised some one had removed the jacking point... Buggas.

Any advice to protect from petrol? Spilt a bit yesterday and it flaked off.

Had similar issues with mine, was multiple air leaks in the end. Took a price of washer jet tubing, stuck in me ear and went around the engine with other end. Inlet manifold, carb gaskets etc. Also replaced my coil as was old and over heating. After that seemed to do the trick. Gaskets cheap enough ...

Yeah we only slide the back one too, but why the option to move the front one? Must be some reason why it's not fixed down.

Sounds good but then if you use it to make a double that wouldn't work would it?

just thought i would post this as feels like im missing something or probably not, just the bed set up above. why does the front board slide when you never have to? (or do you) and how does everyone get up there as i tend to stand on the r&r bed (when upright) which prob aint too good for it. ch...

Ps it is already fused so hopefully safe for now...

It's the yellow wire I recently discovered to be the live feed. Kept the original cable from battery to relay. So maybe a should uprate this wire now? This because L battery will be drawing more current through the system? Will do that tomorrow thanks.

fixed it, made the error of assuming. and "assumed" red wire was (+) feed. where as its yellow. swapped em round and all good. getting 13.8 v to leisure now.

time for tea and medals.

hello, have wired up the relay as below; 1-alt light (green wire) 2-main batt (thin red) 3-earth (black) 4-fridge (yellow) 8-leisure (thick red) disconnected leisure + terminal and tested for volts there, what reading should i get as was not much? also my 12v wire from battery to small fuse box near...

Found this in my paperwork wondered if there is a place for uploading it, if not might come in handy for someone.



Marc