Club 80-90 Forums

I recently replaced the switch on the sink tap (touching the 2 wires together got the water flowing) but in the process I think I touched the wrong thing as now the tap doesn’t work. I ran a 12v supply to the pump in the water tank and that’s fine and then ran a 12v supply to the incoming side of th...

I think he knows his stuff - most of the garages use him. He's concerned with doing all the work to strip/clean/swap/rebuild the engines only for something to go catastrophically wrong due to insufficient/incorrect fuel delivery. If it works but is perhaps not ideal, then I can look to echainging my...

I'd actually trust a mechanic who had questions about the details of the engine swap over one who say 'Just en engine, innit? Take one out, put one in." If you DON't know what you're doing, you don't know what to ask. I saw the brickyard article but I've also seen lots of posts that imply the J...

Sure - it's £1650+VAT for a bare 1.9TD, with a £400 surcharge until you return the old engine.

However, it's also about 12 hours work to do the swap. Stating to wonder if I shouldn't have gone down the 1.9TDi route from Ultimate Engineering for £4K all in for engine & gearbox fitted...

Steve

I'm sure all this information is in here somewhere but the only definite answer I found was that the upgrade is easy and that the JX fuel pump is OK on the AAZ.... Just had a remanufactured 19TD AAZ from AW Engineering delivered to my mechanic to replace the broken (crankshaft pulley bolt snapped) 1...