Club 80-90 Forums

PM sent 

Fitted a Fiamma on our high top just removed 2 small sections of fibre glass to let the brackets sit correctly. The ARB brackets are a similar fit I believe.

did something similar on ours

Thanks Aidan new Weddle 5th gear set just ordered from Paul at Vantopia

E-mail sent to Paul thanks

We have an 89 1.7 D Komet which started to drop out of 5th gear, so now have the box with my local gearbox company, Im over in Northern Ireland. Gearbox guy got me to order new scynco hub + a few other parts, which I got from Brickwerks however I need the 5th gear to match the 5th gear syncro hub it...

Brickwerks normally have them in stock did mine recently , easy to replace, test your LDA using a bike pump



https://www.youtube.com/watch?v=k6neDOZRJj0

keynsham1 Fiamma in the photo is on my Komet high top  just removed a small section of the fibreglass that sits in the gutter for a nice fit.

Fiamma F45 on Fiamma brackets 

noticed a small leak on the LDA shaft so ordered up a new seal from Brickwerks looks like it needed changed 

I know you can move the lever forward and put your finger over the hose inlet on the LDA if is good the arm should not move until you lift your finger, but this way at least I know for sure its OK 

Just a quick tip for testing your you LDA if your running 16 TD. I had put a new fan belt on my syncro last week and then started the van up, gave the engine a rev using the lever on the pump and noticed the LDA arm was not moving. So after some head scratching and the thought of spending £180 on a ...

3mt on ours

Yup Fiamma as well, have end blockers and front sun blocker 

Yup sounds like the conversion guys are going to have a few problems when they stop making them with diesel engines.