Club 80-90 Forums

Plastic JK rail. Absolute garbage. Previous (original ones) were plastic but better quality - they’d just suffered from time! With the rest of the van done with the crappy JK don’t really want to do the whole lot again. Probably go with the silver stick on covers I have in the garage. Just irritati...

Sorry had a working weekend, I’ll try to get pics this week but my whole back is full of panels and painting stuff while I fix it. I’ve also found my wiring diagram for a 00 2.5 legacy, but I don’t know how to share it from my incredibly old garage laptop. If you have a solution I’ll gladly share i...

Thank you all for the fantastic advise . Do you have any pictures of your setups ?

Sent from my HUAWEI GRA-L09 using Tapatalk

Hey guys , thank you both for your wise words. I feel im on the home straight with loom now. Iv identified all the required pin outs now and have two relays. main relay and fuel pump relay sorted I will utilise the t25 fan relay Hopefully everything will work fingers crossed Sent from my HUAWEI GRA-...

Hey guys So im part way through the loom conversion from a 2001 subaru legacy 2.5 auto. Its going well so far but could do with a wiring diagram if anybody has a resource or advise ? Iv used a pin out for my Ecu 2261and identified each pin and removed what not needed. I feel iv come this far there n...

Hey guys thanks for the replys I have heard very good comments about the rjes kit. I spoke to richard on the phone and he was very knowledgeable and even sent a list of required parts for the build. Im going to do the mechanicals and the electrics myself. Wiring up my beetle from scratch was a learn...

Hey guys I'm in the process of finding a conversion kit for a 2.5 subaru engine to fit in 1.9dg T 25 Has anybody had any dealings with TSR http://www.tsrengineconversions.co.uk/contact.htm" onclick="window.open(this.href);return false; They do a kit for the same price as a bell housing fro...

I have exactly the same issue with mine. Compression test fine , hydraulic followers replaced and rockers set as per manual. Still Popping back through the carb lack of power and dies under load. Im in the process of removing the engine now due to lack of confidence and finding oil sheen in the cool...

Hi guys , I have an issue with my 1.9dg t25 engine I have changed the following plugs leads dizzy cap set timing rebuilt carb checked jets this is how its running currently . not my engine but the same fault https://www.youtube.com/watch?v=MgF76cMviU4" onclick="window.open(this.href);retur...

I had the same issue with my 1985 1.9dg , changed the fuel pump and it solved this issue for me . But like I always say start with the least expensive fixes and work upwards . Battery needs to be a good one then move onto serviceable parts ect . I always think its worth a good service before the sea...

http://i24.photobucket.com/albums/c33/driftingmx5/Mobile%20Uploads/DC48F3B2-D36F-40A5-A23C-0CB38223B8C4_zpsbh8ju7yc.jpg http://i24.photobucket.com/albums/c33/driftingmx5/Mobile%20Uploads/9000426D-6B0E-4EFE-AB45-714FB88A0B23_zpsuy3h9wdm.jpg There is a good 10mm thread there and the bolt feels positi...

Thanks itchy feet

So far I have repaired all 3 and re tapped to 8mm

I have some thinking to do about the next step on the 4th hole

I am not sure how reliable the liquid metal would be so maybe welding might be the answer

Hi thanks for the replies , that would be great if you could test a scrap head to see it breaks any water jackets I think I may be able to tap deeper then liquid metal as a final measure I have drilled the other snapped off bolts with an 6mm drill . Following a 6.8mm drill and tap 8mm 1.25 see how w...

Hey guys can this be fixed? Sheared exhaust m8 bolts . Put m6 drill down it then tried easy out and this happens :( I was thinking about drilling straight through and putting a nut on the other side but though there might be a water jacket there ? Any help much appreciated [URL=http://i24.photobucke...

I just received the new Vw heritage catalogue and noticed whilst flicking through that I might not be using the right coil for my bus I currently have a standard silver Unipart I think don't quote me on that fitted Amongst the spares I received with the bus I have a bosche 211-905-115/b used for oe ...