Club 80-90 Forums

great info...thanks martin

lom ?

any one know or has a valve adjusting tool for 1.6cs diesel

if you ring them and ask for Johnnie

make sure you got a good earth to starter though...
like i said it sounds like the cold start..if it helps when you get round to it get in touch and i will send you some pics of how i done mine

i would also say check 12v supply to glow plugs..just had same issue on my 1982 1.6cs diesel and it was the relay..changed it to 40amp and all is good

undo the nut by the rubber bellows and move the linage to and fro thn get some one to hold the stick where 3rd should be then do do it up

woohoo all my gear are where they should be now..adjusted the linkage in the middle not under the stick..with the new repair linkage at the gear stick as-well its all lovely and smooth

fair play mattbw glad your all sorted...if you need any more you need to ring t25 direct.com and ask for johnnie.he very helpful and a good guy and cheap..

brickwerks do the clear bulb with a blue cap for about £6
i got whole set from t25 direct.just waiting for delivery

yeah tried maplins..they dont do them...ive tried vw main dealer and no luck with them
but i did manage to get hold of some from t25 direct.com

looking for the little led bulbs in the dash (one for the glow plug and main beam both amber and one green for the indicator...
ive been searching everywhere and still cant find any.......

1982 hightop 1.6cs diesel total re-built engine

thanks for the heads up..going to look at it today....

hi..can anyone advise me..my 82 1.6cs bus 4 speed box..my gears are not where they should be.
1st gear is where reverse is and 2nd gear is push down to left and back and 3rd and 4th are where 1st and 2nd should be...the box was took out as ive totally rebuilt the engine