Club 80-90 Forums

Thanks for that!

Bentley guide wasn’t very clear

The German one doesn’t match

If there’s anyone out there who has actually changed one over I would be grateful for advice

Hi everyone Just wondering if anyone has tried to wire a smad absorption fridge 3 way I have a positive and negative on the fridge but a number of wires from the old RM184 Electrolux At the wire connector block two reds go to a black two browns to a blue and a blue to a light colour wire I do have a...

Guys Many thanks for your responses on this one. Just trying to make my van a bit more future proof The reason I wrote this post was I saw a German plated van in Lyme Regis with the label on the tailgate katalizer Indeed the van had a dinky in-line cylinder with a bottle neck at both ends between th...

Many thanks for your responses

Not the response I was expecting though

I’m trying to achieve cleaner emissions I.e. lower nitrous oxide

I know they did fit them to some t25 diesel vans

Curiously, very little information online about retro fit filters to older diesels

Regards

Hi there

I would like to fit a dpf to turbo diesel jx engine

Does anyone know where I can buy one?

What are the pros and cons of these filters

Many thanks

Its identical bar the connection

i should be able to use it if i know which 3 wires go to the +/- on the new pump

i got spade connectors to do it

regards

Just bought a replacement pump from vw heritage unfortunately the power plug doesnt fit

I could snip the wire and use spade connectors but dont know where the 3 wires go to the 2 connections + and -

does anyone know?s

Thank

I seem to have a problem finding a new belt.

I measured the length in-situ approx 800 mm x 8 or 9 mm wide.

Does anyone else have this belt and know where I can get a new one?

Appreciate any responses

Regards

spoke to t25 direct they seem to know their stuff in supply and fit engines, and have all the options of different engines pretty much hassle free for a week without the van at around 2K all in! to use that shocking phrase; a one stop shop! still a lot of money and probably can be done cheaper elsew...

Great advice!

thanks for that!

Jxs range from 1300 to 1600 pounds recon but cant find price for recon aaz

its a job ill have to do soon.


Ill check this guy out

I live in somerset

i was think a recon motor ideally with ancillaries

basically hassle free for a garage to do

Hi there

does anyone know who and how much this can be done?

Is tbere such a thing as a turn key motor?

Regards

Hi there

just the head gasket replaced on my 1.6 jx turbo diesel.

unfortumately a clamp bracket thingy broke from the inlet hose to the turbo

can anyone tell where to buy this part and what it looks like

thanks!

Hi there

My 1.6 turbo diesel has a wobbly bottom pulley (bottom left one) allowing the alternator belt to jump

Is this fixable? What might be the cause?

Bentley manual not very clear.

any advice or experiences please reply

Thanks!

Got the wagon going again with help from AA

Kit you were right - dirty fuel filter

Might change the glowies though

Thanks everyone!