Club 80-90 Forums

Needing to replace ring connector to solenoid but what amp is required.

Got the same issue with 1.9 DG . Due to Lockdown first couple of short runs out for a few month ran fine. Yesterday fine for ten minutes stopped and started at a shop then next junction cut out when i took my foot off accellerator. Will not idle at all. Had a full service at the end of last summer. ...

Got similar issue. had all the wires to the starter replaced and new connectors by reliable auto electrics place and the starter is not even two years old. Our issue seems to be when it is hot. So we will be able to start and run it but for example after 10 mins stopping for petrol and then nothing...

Got similar issue. had all the wires to the starter replaced and new connectors by reliable auto electrics place and the starter is not even two years old. Our issue seems to be when it is hot. So we will be able to start and run it but for example after 10 mins stopping for petrol and then nothing ...

The pulsing is mechanical as it matches the wheel revolutions. It is intermittent though which is strange and it was not there before rear brake overhaul.

Plot thickens. Rear now has new drums, cylinders, shoes, hoses and fluid. I couldnt feel it on way home but mechanic said it is but he can not understand as it seems to be intermittent.
May try new front discs next month if it is still bad.

If heavy braking the foot is pushed back repeatedly. If braking at slow speed it it is much slower and less aggressive. They worked it back to the rear brakes on the rolling road and also isolated one front disc. Had an advisory for a rear bearing on last MOT. When I bought the van 4 years ago the p...

Didnt have time to sort out my brake shoes on the back so took it it to my garage that have been using for years. The drums were also replaced as I had let them go so long. Got the van back and noticed the brake pulsing especially if heavy braking. Took it back and they replaced the drums like for l...

I have a copy of the original brochure if you pm me i could send you some scans. It came with our van. The original owner kept everything, got the original receipt and even his photo card for European camping club. One thing we never got was the extra bit for the bunk. I made my own but not sure whe...

http://www.halfords.com/cycling/accesso ... rrier#tab1" onclick="window.open(this.href);return false;
Has anyone tried one of these halford ones?

Cheers Marlinowner. One listing is a diagram of wbich blade is which. No more switching the wipers on and off. WOO HOO.

Read all that on the wiki and printed off but I can not tell which blade is which so dont know which one to wire up. On the wiper block that you pull out each space is labelled so you know where each wire goes. The relay I bought does not label the blades so cant do it. Somebody must know which is w...

Hi all, got an 84 model and need to hard wire the intermtant wiper relay. However the one I got from Ireland not a vw/audi part and the pins are not labled. Can anyone let me know which pin is which.
Ta

Yay, nearly every camp whether on a site or a rough camp. Except last weekend in Anglesey when in Rhosneiger and a really hilly site parked dead flat first time. store them under the seat just inside the sliding door on our Autosleeper Trooper fit in neatly with the step and toolkits and leisure bat...

Can the handle on a 4.5kg cylinder be down when the regulator is on?