Club 80-90 Forums

I guessed as much, I've since found out that it can't be the relay if only one isn't working? THanks

Changed all broken fuses in glove box and under passenger seat

I've changed the bulb twice and no change? I suppose it could be two faulty bulbs, but is there any other possibility?

I know that it probably has something to do with the headlamp relay, but want to be certain that this could be the cause before I go tinkering with something I don't understand.

If it is the relay, do I need a new one, or are there other issues I can cross off the list before I buy?

Fixing my headlights on my T25 which have gone a bit squiffy. I realise that this may be a very basic problem, I'm just not savvy electrically. I have searched, but I'm still a bit lost. Both headlights work on normal beam, then when I turn to full beam, only the nearside light works. Plus, the side...

Timesave, thank you very much. Ordered and on their way already Let's hope my clumsy hands don't snap all 5 of them

Heyo Last week I attempted to change the upper ball joints on my van. One side was fine, but on the other side the head of the bolt that attaches the ball joint to the wishbone snapped off. Where can I find a replacement for this? Is it going to be impossible to find something suitable in a hardware...

A bit more research, it seems that not enough power is making it through. Apparently this could be the contact tip being too far from the point of weld. Even on full power it's just building up and not penetrating at all. The other day it was welding much better. Since then I don't think I've change...

Hellllo, I recently purchased a MIG welder... a Clarke 105en (I know it's not great, but can't afford anything better) I got some 1mm steel, and trying the welder on lots of different settings, but just can't get it to actually weld. It just keeps creating lumps of melted welding wire on the surface...

After some serious hammering I finally got the stuck one out, and replaced.

Any ideas on how to get the snapped bolt out? I think I can just drill it out if I can get the drill in there, because the thread only screws into the actual ball joint, not the wishbone...

So got to changing the ball joints that failed my van's MOT a couple of weeks ago. The retest is on Monday, although looks like I'm going to have to cancel and book in another full MOT :roll: Anyway, changed the tie rod ball joints with not much hassle, got to the upper ball joints and now I'm stuck...

Fairyenuff... I was on that webpage a week or two ago and then couldn't find it at all earlier. Cheers

But I couldn't order combicolor spray cans from them. Either that or I completely missed it.

I couldn't find any places to online order the colours I wanted for this purpose, so thought I'd come to a forum with a large amount of members who will know the answer.

Sorry if this is talked about elsewhere, I looked through the thread at the top but couldn't find many links to suppliers. A few months ago I painted my van using the rollering method from the DVD. Worked quite well, although didn't get the smoothest finish... still good enough from a couple of mete...

Well It does seem that it's only the rubbers that need changing, at least on my MOT, but I thought I would just change the entire lot whilst I'm down there, I hope the next owner will appreciate it, so ended up buying 2 upper ball joints, and then both complete track rods... all for about £50, which...